www.imoc.co.uk

sheppy wrote:i could be wrong but i was under the impression that all nitrous did was make the air denser as opposed to putting more pressure into the engine, basically the combustion is a more explosive err...explosion

have a look here >> http://www.noswizard.com/nos-technical-information

i had a 25 then 50 bhp kit on a old mondeo i had, it was a 1.8, that put out the same bhp as a 2.0, before the NOS :thumleft: (some 170-180bhp with NOS) NOS is alot of fun, but put too much in and its gunna be an expensave lesson. Also put it into a worn out engine recklessly, and its gunna kill it....

Hi mate, i dont think anyone will give you a diffenitave answere either way, there are too many variables (skill of the preson welding, composite of the original metal etc etc) that said a pic might help :thumleft: , as it may just be a hairline surface crack, which sould (*may*) not cause you any i...

zaid_mohamed wrote:Called ryan at 2bar, he help me out. i fixed the issue and gona book my car in with him to get it mapped

big thanks to ryan at 2bar

Do tell what was wrong???

has the power fc been set up for your car?

that *may* be the issue, it might need setting up

I would have also forked out for a Berk de-cat with flexi built in. That downpipe will crack. i have been looking at this, is it the flexi that makes the berk better? or is it reinforced? :-k :-k if its the flexi, i noticed you can get 3" flexi's off ebay, and it got me thinking of getting a t...

bargin






where from

back when the seal between my drivers t bar and door was leaking, i just stuck a dehumidifier in there overnight, was nice and warm in the morning

I don't get the Rev3 conversion either, I know it's relatively easy to do using all OEM parts, but I can't understand why people don't just fit a half-decent 2nd hand standalone system for the same amount of cash and a lot less time messing around. When you figure the cost of the Power FC into it, ...

you can go on the dvla's website and view all the old MOT's from any car now, you just need the reg and reg document number (iirc)

but dont forget some cars may have the milage in KM's not miles, and if its a untouch import its likly to be KM's

no loose plugs anywhere?
(i know stupid question, but i have been caught out in the past with it)

Just come nack from my first track day, thoroughly enjoyed it but was cut short due to the pads wearing out. I was on stock pads/discs etc and really suffered with brake fade and wobble after only a few laps. Let them cool for 20 mins and they came back. Its something im looking to improve. I can g...

is it from cold or all the time?

i am no expert on aero dynamics. however, my first thoughts, are have you tried removing your rear wing (tempary) and seeing if that makes a difference at speed? the way i see it, is if it is pressing down the rear, it could cause the front to alter its angle of attack (ok so i know i am talking a ...

i am no expert on aero dynamics. however, my first thoughts, are have you tried removing your rear wing (tempary) and seeing if that makes a difference at speed? the way i see it, is if it is pressing down the rear, it could cause the front to alter its angle of attack (ok so i know i am talking a f...

I don't mean to hijack this thread, but what is the difference between a L2 and a 005L battery? I only ask as my rev 2 has the L2, and it dosnt fit right in the battery box, the top clamp is approx an inch or 2 above the battery :? That sounds dangerous :shock: when I bought my first mr2 from hasti...

5 points to me

sounds good there mate

I don't mean to hijack this thread, but what is the difference between a L2 and a 005L battery?

I only ask as my rev 2 has the L2, and it dosnt fit right in the battery box, the top clamp is approx an inch or 2 above the battery

looking good there mate

few bits fitted this week :thumleft: wiper stalk assembly ..... now the wipers work :thumleft: \:D/ (soo much for the auto electrician the guy had look at the this before he sold me the car ) tried swapping the map sensor (tested the gauge seems ok), didnt make any difference #-o .... so will leave ...