www.imoc.co.uk

Hi, When people ask for my paypal address I type chris@cjbaudio.co.uk which automatically gets underlined making it look like cibaudio not cjbaudio. Also the search function is now annoying as you cannot use the 'Back' button without a refresh / retry operation, I know I should adapt and try to reme...

I did exactly that and the guy on the desk wanted the chassis number. I said the engine number would be better as the car is 13 years old and its not uncommon to change the engine on this kind of car but he insisted on chassis number only...... In the end I looked up the part numbers myself and just...

Grajey wrote:I think the block is marked and piston size B or C etc matches the bore for tolerance.

Yes but this is the 1,2 or 3 number.
What is the A,B & C for ????????

Is it the weight?
This could balance the crank / rod / piston assembly.........

I'm ordering from Mr T today and need to double check something. The piston I am replacing is stamped 2C, according to the BGB the number 2 refers to the diameter of the piston therefore I need part number 13101-88381-02 What does the 'C' mean??????? I just wanna check that size 1,2 & 3 doesn't ...

Thanks for the help! I've decided to keep things standard and get a new piston. (The other 3 are spot on so don't see the need to mess with them) Unfortunately this means I have to buy a full set of rings from Toyota :( Why will they sell you one piston but only a full set of rings for four pistons ...

OK, but can you confirm that they fit onto rev2 conrods?
Cheers,
Chris.

anyone?

Will rev3 pistons fit straight into a rev2 engine?
As they are lower compression is it best to fit a rev3 headgasket?
What exactly is involved in fitting a rev3 headgasket to a rev2?
What are this coming Saturdays lottery numbers?

Thanks for any help,
Chris.

:cry: Pete, its is a possiblity that theres crud on the valve seat allowing valuable compression to drop. Though it does sound suspect like a cracked ringland... explains the oil being pulled through too. If you wanna have a crack at it yourself and pull it apart, I've got a set of ST205 pistons / ...

Looks like someone in China is scamming the very same engine - AVOID

http://cgi.ebay.co.uk/TRD-engine-Toyota ... dZViewItem

Interesred in racing but my wheel is mysteriously dead
Mouse power..................

Hi, I need a set of rings for one standard 86mm piston. From searching the forum it seems that Toyota only sell them in sets for 4 pistons for £110 :o I tried my local motor factors who phoned 3 places with no result. The bore is honed and ready to go but I need rings !!!!!!!!!!!!!!!!! Anyone know o...

Hi, how heavy is a regulator - a rough idea is OK?
I may have to post one to the states but dont want to dismantle the door only to find out that the guy wont pay postage.
Cheers,
Chris.

Hi,
I'm after a NSF 15" wheel and tyre for getting the car through its MOT.
Anyone local to Norhtwich, Cheshire got one?

Cheers,
Chris

Goto10 wrote:

poyntesm wrote:that was at Mondello in Dublin.

Pete now has a RX7

Didn't he flog that after realising it did 1mpg?

Yup and he managed to buy his perfect car
A Suzuki Cappuccino





He's also waiting for something on a boat from Japan.....

Can anyone translate the Q3, Y1 etc. codes found on the yellow sticker on the timing belt cover.

Cheers,
Chris.

Try and use a good quality 12mm hex socket on the pump as those bolts are awkward!

Hi!
My exhaust camshaft has the following number 88362 on it, is that correct for rev2 the only EPC i can find has 01/11/93 onwards part number of 88460
anyone know where there is an EPC for rev2??????
Cheers,
Chris.

Yup, theres a bar which spins around!
Thanks!

Chris.