www.imoc.co.uk

Just seen this, if anyone is after one, I 'm not a premium member so can't put it on parts for sale, it's not mine anyway, though I do have one spare, just thought someone might be interested only 5 hours left.

Item number 160362440746

Okey Doke. Thanks

LOL womens sunglasses colour, I lke that one.

I was thinking about buying another clock to convert to red, then just swapping them over, I was worried in case the one I bought turned out to hve green numbers and wouldn't work to turn red. But it's fixable then is it?

Still not got round to doing all this yet, but somebody mentioned, I think it was in another similar topic, can't find it now, that when they took off the filter glass the number illumination was green, not white. Are some clocks green and some white then? what difference does this make to the final...

Very interesting, thanks for posting that. Incidently, my guage is working ok, when I fitted the cream dials I got the needle position slightly out ( will sort it at a later date) it's now three digits above empty when the light starts to come on.

Yes, that's the one, Cheers for that.

I was wndering if they might be too bright, what about putting a diffuser of some sort in the switch caseing before putting the circuit board back? a sort of neutral density filter inside the switchs. ( light smoke grey transparent plastic maybe) The two 5mm bulbs I have got red covers for instead o...

Just about to do my heater control etc and looking for the right stuff. Would these do the job? is the voltage ok etc. http://cgi.ebay.co.uk/3mm-LED-RED-Clear-25-Pk-of-10-100mcd-Superbright-IN-UK_W0QQitemZ260351823829QQcmdZViewItemQQptZLH_DefaultDomain_3?hash=item3c9e2d8fd5&_trksid=p3286.c0.m14&...

Just a further note on this topic, I saw someone mention somewhere about changing the colour of the indicator arrows, but I can't find it now.

Has anyone any info on this please? Everything on mine is going to be red, these arrows are green.

Thanks for the reply. I haven't taken the clock out yet, but yeah, I know to remove the original filter, I just thought 3mm would be a bit thick.

I want all the stuff I need to do the heater control and the clock at the same time while I have it all to bits.

Nofearmadbiker, was that the 3mm you used?

That's what I thought it looked like 1.5mm,, I emailed trent plastics who I bought the sheet from and they don't do less thickness than the 3mm. The blue pictured above looks great, and they've all been on about using this stuff for£1.30 from Ebay, which as far as I can tell must be 3mm. I would jus...

Thanks for that Sketch, I had actually seen that, but 3mm seems a bit too thick, is that what everyone else has used? and if so, does the clock face fit back on ok with this 3mm stuff?

Nofearmadbiker, that job you've done with the blue looks perfect, was that the 3mm thick perspex you used? it looks a bit thick to me the stuff i got, the original looks to be only about 2mm if that.

Just got the acrylic sheet this morning, I don't think it's the right stuff, 3mm thick and it's deep red, not opaque, you can't see through it, not like the stuff in the instructions here.

Going to have to look for some thinner see through stuff, or has anyone got any left over? Red

I bought a second heater control and fog switchs from Larry93 on here with the intention of doing the mods to those then changing them over, but the heater contol is not as good as mine, has a few flaws in the plastic, so I'm going to just use mine. The illumination on the fogs is a white bulb, the ...

Thanks, hooked already lol, Did the cream dials with amber illumination, bought red bulb covers for the heater control, now the red acrylic for the clock, I am now trying to sort how best to change the illumination on the the two small fog light switches. I am thinking here of using the red acrylic ...

Just bought a sheet of red, as you say £1.30

Whats the best thing to cut it with? craft knife?

Found it, cheers slipping clutch.

http://www.halfspec.com/downloads/clock/clock.htm

There it is if anyone else wants to see it.

Hi
Before I pull mine out and have a look, can anyone tell me if the green illumination is done by silicon bulb covers, thereby making changing it to red just a matter of changing the cover on the bulb/bulbs please..