www.imoc.co.uk

Yes Dexron 2 drain and refill 3.4 litres (dry fill 8 litres) http://www.autoshop101.com/forms/h17.pdf I have removed the auto lever and boxes from mine (so have spares if needed) as I moved the O/D PWR and Man buttons to the dash and fitted a modified lever to my auto Image Replaced With URL For Qu...

Hi 1 st I recommend dropping sump off the auto box clean magnets in sump and replace filter inside auto box about £30 from Toyota and is a service item,on mine it's says dextron 2 on dip stick but I've put dextron 3 in and been fine,also I'll have some spare bits for auto soon like mini ecu in cent...

Hi Guys,

I'm servicing my 1997 MR2 G-Limited automatic and want to what type of automatic gearbox fluid it needs to drain and refill please?

Your reply will be appreciated.

Thanks

ABS warning light always on indicates malfunction of ABS module. Cheers mate - I've put out a request for an ABS ECU, there's a quiet a few times. Do an ecu code test :thumleft: Edit .. think i've got this right 8-[ When I unplug the grey two plug connector and do the paper clip test on the grey en...

Peter Gidden - SBITS wrote:ABS warning light always on indicates malfunction of ABS
module.

Cheers mate - I've put out a request for an ABS ECU, there's a quiet a few times.

Guys,

What other test should I do?

Should I buy another ABS ECU and test it with that?

Any advise will be appreciated - thanks!

Hi guys, I have a rare Import MR2 Automatic Rev 4 or 5 I think as it has twin airbags. I have just sorted out the speedo plugs on my MR2 as the previous owner had messed around with so it was not illuminating all the warning lights on the speedo. Now thats sorted, the ABS light remains on continousl...

Update: Delimiter removed, the UK clock is now working accurate - cheers madbasshunter. The ABS light is now on, but I will open a new thread for that as I think this is another whole issue. Cheers guys for all your help and advise, almost fixed all issues. Hopefully this ABS is more simple. Thanks ...

Second link above is the blue one https://www.dropbox.com/s/e6obety29djmc86/2015-05-22%2018.59.11.jpg?dl=0 Have whats apped them to you as well Firstly, a big thank you to you madbasshunter for the pictures of the plugs, it saved me a lot of time of testing each cable! Its fixed the MANU, PWR and O...

Cool

Got the blue one too cheers, didn't realise there was a second link, using my iPhone which is a pain when using for the forum - cheers mate!

Thank you mate!

Sorry to be a pain but can I get one of the blue plug as well please?

I have the rest of the loom if you need more pictures of the other plugs. I think you will only need to remove the convertor with the uk clock I think im getting somewhere, someone has been p1$$ing around with the brown plug, so I switched over the blue/white and blue/red so now the correct light i...

What and why are the only words that spring to mind, https://www.dropbox.com/s/4fpcenx980fmqud/2015-05-22%2018.58.48.jpg?dl=0 No idea why mate. I'm going to print that picture and make sure the pins are in the right place on the plug. I've got to swap the MPH clock with my old Import one as I have ...

Ok, so I replace it with another cluster (supplied by madbasshunter, thanks mate) and still have the same issue! :( No idea what to do now, the speedo and shifter have now both been replaced but hasn't fixed the issue. I have checked the cable/plugs that go into the speedo cluster and could only fin...

I did the test, the O/D off (light green wire) doesn't get a 12v current. Even selected doesn't get a current. :( Sorry bad explanation by me :oops: When O/D is off there is 12v which illuminates the light but when it's on there is no current. The light green wire is found at the front of the shift...

rev2rich wrote:Sorry to hi jack the tread but I am after the part number for the 3 bolts that hold the sub frame mount that go thou the sub frame it self.. Went to Toyota with the mount and bolts but could not find the numbers on their system

Cheers Rich

No problems mate, it may help me too.

kev8611 wrote:Yeah you are. It wont cause the engine to fall out though but get one in there as soon as you can

Cheers mate - I will do!

Hi Guys,

Today I have been looking around the engine bay and saw this:



Am I missing a bolt and nut here? Looks like something should be here.

Any advise welcome and appreciated

This might help for checking When when O/D is off the light green wire from selector to dash and to 22pin plug at ecu has 12v When Manual is selected the Blue/White wire from selector to dash and to 22pin plug at ecu has 12v When PWR is selected the Blue/Red wire from selector to dash and to 22pin ...