[Mk2] [Generic] 1996 Import Rev 4/5 ABS Issue -No Code, Light Continious & Solid

[arif_manji]

Hi guys,

I have a rare Import MR2 Automatic Rev 4 or 5 I think as it has twin airbags.

I have just sorted out the speedo plugs on my MR2 as the previous owner had messed around with so it was not illuminating all the warning lights on the speedo. Now thats sorted, the ABS light remains on continously. I have done the diagnostic but shows no code, only the P/S light flashes and the ABS stays solid. I disconnected the ABS ECU but the light remain illuminated. I left the ABS ECU for 45 minutes but made no differend.

I have uploaded some pictures, any advise and help would be appreciated guys, thanks!

ABS Light at Ignition

ABS Diagnostic

[arif_manji]

Guys,

What other test should I do?

Should I buy another ABS ECU and test it with that?

Any advise will be appreciated - thanks!

[Peter Gidden]

ABS warning light always on indicates malfunction of ABS
module.

[arif_manji]

ABS warning light always on indicates malfunction of ABS
module.

Cheers mate - I've put out a request for an ABS ECU, there's a quiet a few times.

[2mad]

ABS warning light always on indicates malfunction of ABS
module.

Cheers mate - I've put out a request for an ABS ECU, there's a quiet a few times.

Do an ecu code test


Edit .. think i've got this right

[arif_manji]

ABS warning light always on indicates malfunction of ABS
module.

Cheers mate - I've put out a request for an ABS ECU, there's a quiet a few times.

Do an ecu code test


Edit .. think i've got this right

When I unplug the grey two plug connector and do the paper clip test on the grey engine diagnostic box, no code appears and the ABS light stays solid on and P/S light just keeps flashing.

[2mad]

I suck .. i've done this test ... sorry it didnt work