www.imoc.co.uk

Trial and error but got cams sorted and think it gives her a far more medern look

Hi, I have a set of lights that I am about refurbish so all components are easy to get at. I'll take a look and get some pics / measurements at the weekend if that helps? BTW I've emailed Rogue a number of times, never get a response :? -Mark that would be great thanks then I can get mine working :...

Hi all was luck enough to get Rev6 quad headlights for my project a few years back and now comes the time to fit them but I have discovered the 2nd hand set I got don't have the cams for the motors, I have sent an email to Rogue to see if they still had any but not had any reply has anyone an idea o...

New pump finally arrived and for £29.99 its a perfect match

still a pain to re-install tho

Cheers that confirms the one I was looking at was correct even if seller wasn't able to lol

Hi

Anyone able to help with Toyota part number for 1990 2.0G limited N/A
The old pump only has denso 195130 0800 on it and I'm struggling to get a Toyota part number to cross reference a replacement

Thanks in advance

got tank removed and pump seems to be the issue was a nightmare to get out climbing on the engine to get at bolts lol pump I think is gummed up as looks like it has a coat of varnish half way up with all the evaporated fuel but it lasted almost 24years so cant complain http://i53.photobucket.com/alb...

MR22 wrote:Hi.

Can anyone advise whether it is possible to remove the T-Bar Glass from the locking mechanism ?

Any help greatly appreciated. Thanks.

Think this is it

Skywalker wrote:Just pull the return line and run it into the bottle.ig on and bridge b+ fp you should get fuel.
Then check wiring.

Thanks just tried that and no fuel or noise just a spark when the contacts are jumped

Hope someone can help... Been slowly rebuilding my 1990 Mk2 MR2 NA for about 6 years on and off started with all the oily bits all where fine, stripped all the paint and now got her about 75% done and ready for rebuild over the years she has been started every 6mths or so and never missed a beat but...

despite the cold got a few checks done, Fuel passing through new filter with no issues, and fuel getting to the fuel rail turned the key and she caught and stumbled around at about 500rpm for 15 seconds then dies off again and despite priming the fuel system she wont catch again. frustrating as she ...

Are you definately getting fuel at the injectors?? Peter is saying bridge the fuel pump at the diagnostics port as this will definately mean it is running when you try to start her. As there is an aftermarket alarm there it may be immobilising the pump on start up! You could also pop off the exit l...

Peter Gidden - SBITS wrote:Take plugs out. Clean with blow torch or gass cooker flame.

Bridge fuel pump terminals in diagnostic port.

Try starting with fully charged battery.

Just tried that no luck she is keen to turn over and you here her try and catch from time to time but still dead

Checked distributor today and looks like new inside, gives a good spark ECU I believe is REV3 http://i53.photobucket.com/albums/g77/JAY61076/Saz%20rebuild/photo11.jpg I had a check to see if this car had a factory immobilizer and looking at the ignition barrel there doesn't appear to be any form of ...

1st attempt to work on the car today :-) all missing bits replaced Fresh oil all turning over nicely. Flushed cooling system to and fresh coolant Plugs all sparking nicely turned the key and fired up ran at 500rpm for a few seconds then died put 5l of fuel in the tank just to be sure it wasn't lacki...

New manifold arrived today but won't get a chance to fit it till the weekend, Oil and fluids all fine someone had been working on it a few weeks back hence the missing cover. The engine has had money spent on it in the past but its changed hands a few times since then and not sure whats wrong yet......

Thanks got a whole inlet assembly on the way now so finger crossed that will let me know whats wrong

Thanks Chassis number says its a Rev-2 but got Rev-3 rear lights cant find any engine numbers as someone has had it out and looks like its been painted and polly engine mounts and a lovely stainless exhaust so someone spent some money on her in the past Posted an ad on the wanted section to see if I...

Just been given a great Birthday present a beautiful 1992 N/A t-bar as a spares but after having a look over it she seems to good to break :-( Tried starting her and rev'd to 3k for ten seconds then died I know its missing a cover that I will need but anyone any clues on where to start as it looks l...

http://www.gumtree.com/p/cars-vans-moto ... /111273441

is this the one? pity its to far away