[Mk2] [Turbo] Dizzy / plugs / rotor arm

Anything and everything to do with mechanical issues with your Mk2

Moderators: IMOC Moderators, IMOC Committee Members

cheekyangel

Re: [Mk2] [Turbo] Dizzy / plugs / rotor arm

Post by cheekyangel »

boosting but not 100% juddering and then boosting to high heaven why?
Tofuman

Re: [Mk2] [Turbo] Dizzy / plugs / rotor arm

Post by Tofuman »

Think i might have that....

Is the re-circ valve the little white circle jobby? :-k

Cheers
Hellboy

Re: [Mk2] [Turbo] Dizzy / plugs / rotor arm

Post by Hellboy »

CAMSKILL are very good and very cheap for the parts ya need.

Or most motor factors get Blueprint parts which are just as good as OEM IMO
cheekyangel

Re: [Mk2] [Turbo] Dizzy / plugs / rotor arm

Post by cheekyangel »

This is the recirc valve tofuman

hope it helps

Image
paul port
Posts: 1472
Joined: Fri Dec 24, 2004 10:50 am
Location: Buckinghamshire

Re: [Mk2] [Turbo] Dizzy / plugs / rotor arm

Post by paul port »

JeffD wrote:
Just kidding, to be fair the dizzy cap on cars between 01.12.1991-01.11.1993 both used part#19101-88364 but after 01.11.1993 the N/A used part# 19101-88460 (see http://www.flashmetal.com/index.asp?fun ... T&catid=55 for part no.s of all components)

They are different as can be seen in photo below:
Image Replaced With URL For Quote http://i68.photobucket.com/albums/i2/je ... zyCaps.jpg


The rubber vents pull off the Toyota caps...
If you look closely afterwards you will see the Plastic part is the same, the only difference is the rubber part (EG which direction it points)

paul
Tofuman

Re: [Mk2] [Turbo] Dizzy / plugs / rotor arm

Post by Tofuman »

Thanks cheekyangel, i kinda wrote the wrong thing, i meant is the white circle bit the one way valve :oops:
But i appreciate the picture! lol :thumleft:
cheekyangel

Re: [Mk2] [Turbo] Dizzy / plugs / rotor arm

Post by cheekyangel »

which white circle bit lol :roll:
Post Reply

Return to “Mechanical”