http://photobucket.com/albums/y89/Fizzy ... works !!
AT LAST - ChargeCooler Install PIX
Moderators: IMOC Moderators, IMOC Committee Members
Re: AT LAST - ChargeCooler Install PIX
Fizzy wrote:nope
http://photobucket.com/albums/y89/Fizzy1/ There ya go mate, did you get my PM?
Craig
-
CosmosblueMR2
- Posts: 7069
- Joined: Thu Feb 03, 2005 5:23 pm
Re: AT LAST - ChargeCooler Install PIX
what's the password to view this pic ?
?Re: AT LAST - ChargeCooler Install PIX
Interesting... I don't get it..?? or is the little rad in the boot an oil cooler? and the big rad with fans the charge cooler rad?
.. I don't get it..?? or is the little rad in the boot an oil cooler? and the big rad with fans the charge cooler rad?'02 VX220 2.2 n/a Daily driver - Exige Size TD 1.2 - TAT shorty Diffuser - HardTop - Chris Tullet 4-1 Manifold.'97 mk1 Mazda Eunos Turbo track car with 260bhp/ton - soon more as Chris Wilsons going to build me an engine over the winter 
) .-
Mark Edwards
- Posts: 11298
- Joined: Wed Dec 15, 2004 9:27 am
- Location: Eastbourne
- Contact:
Re: AT LAST - ChargeCooler Install PIX
How have you got any air flow into the boot though, or are you relying on the fans?
-
raptor95GTS
- Posts: 6213
- Joined: Tue Dec 14, 2004 7:14 pm
- Location: glasgow
- Contact:
Re: AT LAST - ChargeCooler Install PIX
and
also
also
leading to
lastly
ok fizzy, I think thats the lot.
Nice install i'll get mine done eventually ](./images/smilies/eusa_wall.gif "Brick wall"){kind=small}
Last edited by raptor95GTS on Sun Apr 03, 2005 10:59 am, edited 2 times in total.
-
Fizzy
Re: AT LAST - ChargeCooler Install PIX
the entire area under the fns is cut away plut there are 3 large vents in the boot lid - flow is upward so cools the oil rad too.....only ever use one fan as they are so powerful!!!
- flow is upward so cools the oil rad too.....only ever use one fan as they are so powerful!!!-
[KJA]
Re: AT LAST - ChargeCooler Install PIX
Looks sorted =D>
Notice any real difference? did you go from stock IC to charge cooler or did you have a decent IC before?
=D> Notice any real difference? did you go from stock IC to charge cooler or did you have a decent IC before?
Re: AT LAST - ChargeCooler Install PIX
Fizz, is that a WI jet that is going into the rubber sock? How have you mounted it? I havn't fitted my jet yet as I'm still deciding where to put it 
I'm thinking of drilling and tapping the edge of the CC just before it gets to the rubber sock(although it is very thin), may have to weld a nut on the top.
How have you mounted it? I havn't fitted my jet yet as I'm still deciding where to put it I'm thinking of drilling and tapping the edge of the CC just before it gets to the rubber sock
(although it is very thin), may have to weld a nut on the top.-
Fizzy
Re: AT LAST - ChargeCooler Install PIX
its 'screwed in' with lots of loctite and there is a retaining plate atached which is held down by the dodgy looking jubilee clip - this lot enables me to run 1.4 bar with a woppin 15 deg timing with no det whatsoever!
'screwed in' with lots of loctite and there is a retaining plate atached which is held down by the dodgy looking jubilee clip - this lot enables me to run 1.4 bar with a woppin 15 deg timing with no det whatsoever!-
Aidy
Re: AT LAST - ChargeCooler Install PIX
Nice engine but I don't think much of the bodywork
http://i3.photobucket.com/albums/y89/Fi ... ct0022.jpg
