Scorpion Exhaust

[Bumble-bee]

Hi guys, just wondering if any of you have a video of your car with a scorpion exhaust? Im just wondering what it sounds like

[2mad]

Couldn't find anything on the net .. is it for a n/a or turbo ?

[Bumble-bee]

See I tried youtube and could only find bike mines a turbo and thinking of going decat as well as, just want to know what it sounds like and roughly how loud

[2mad]

Regardless of exhaust system .. turbos with a free-flow exhaust and decat downpipe are quite loud .. i had a mongoose it produced some bass i can tell you

[Bumble-bee]

Sounds good to me then man what about the bolts gaskets and the rubber hangers, are they all reusable from the old exhaust system to the new one with decat?

[2mad]

Mine only used the b-pipe and rear rubber hangers for the exhaust .. might have a sweet decat downpipe for sale .. didnt foul the wastegate and had a massive bellmouth .

Ill send you pics if your interested

[Bumble-bee]

Alright man, well the scorpion one im looking at is the full system has the decat down pipe and mufflers but it is all already bolted together so I can just reuse the gasket and bolt it to where the only one comes off the turbo? And then use the hangers and it'll be done pretty much :')

[2mad]

I reused gaskets and bolts .. but this is a car forum so i should say replace them for the best outcome .. leave it upto you .

[Bumble-bee]

Reusing is find Is one of the mufflers supposed to have a clamp on it? -see photos below- the drivers side has bolts but passengers side doesn't have anything?

[Bumble-bee]

[2mad]

Pipe-work looks a bit small for a turbo 2" odd maybe .. had twin 70mm on my mongoose .. dont like pi$$ing on parades

[Bumble-bee]

The guy says it came off a turbo, 3sgte model so I have one of them and just guessing it'll for straight on? :') my pipes are smaller than that and rusted at the moment :') are you saying it won't fit? And what about a clamp being there? Should there be one there?

[Bumble-bee]

The guy says it came off a turbo, 3sgte model so I have one of them and just guessing it'll for straight on? :') my pipes are smaller than that and rusted at the moment :') are you saying it won't fit? And what about a clamp being there? Should there be one there?

[2mad]

I'm sure it will fit .. both mufflers should have a bracket to attach to the cars rubber hangers iirr its been a while

[Bumble-bee]

Sweeet and yeah it's got both of the hangers the bit im worried about is the bit from the from the top muffler to the bit where they meet, how is that held together? Isn't it supposed to have a clamp on it?

[2mad]

I'm really sorry mate i cant tell from the picture .. not sure what you mean by a clamp .. you should have two brackets that attach the the cars rubber hangers .

[2mad]

Do you mean the rubber mount attached before the exhaust branches off into two ? im a bit confused bud .

[Bumble-bee]

Nahhh, you see where it branches off and it goes to the drivers side and it have bolts holding on the muffler? Yeah on the passengers side what the hell is holding that one on? I see it's got something pushed on so it goes together but what's to stop that falling off? Shouldn't there be a clamp around that little part to hold the muffler on the part that branches off?

[2mad]

Ahh got ya .. yeah should have an exhaust clamp on it

[Bumble-bee]

Would my old system have one on there that I could use? And is it 100% needed? :')