Moderators: IMOC Moderators, IMOC Committee Members
. 
lol ... So just want wired up but cant find manual anywhere . Just spend few h looking over net but seems no 1 have manual :/ , working fine but how to connect RPM and duty cycle ?? If it's one of the most recent models I should have a copy of the instruction manual in English.---> minkara.carview.co.jp/en/userid/238216/car/131045/253666/note.aspx (cant post any url yet , so type WWW be4)- for normal evc 3 , 4 ect u can find plenty manuals , but for this one no :/ I found this, which might explain why:"EVC PRO Designed for highly tuned vehicles and race applications, the EVC PRO is adjustable up to 3.0Kpa (43.51psi) and incorporates all the functions of the EVC IV along with additional race inspired features. The EVC PRO takes input from the vehicles ECU and sensors to allow for adjustments to boost levels and characteristics to enhance performance. Boost curves can be programmed to variables such as, engine rpm and throttle position or vehicle speed. For example, when the vehicle begins to accelerate, boost levels will be at a preset level. As the vehicle gets into higher rpm range, the EVC Pro can be programmed to raise the boost level as the vehicles speed increases. This would limit lower rpm wheel spin while maintain full power potential at the higher RPMs. A built-in atmospheric pressure sensor (ATM) provides enhanced consistency in boost pressure regardless of various atmospheric conditions.(43.50psi)(ATM)closed-loop boost regulating stepping motor(W) X 25mm (H) x 84mm (D)(W) X 50mm (H) X 48mm (D)"