[Mk2] [Turbo] Swap 3sgte gen3 on mr2 rev1 3sge na

[arnaud_mr2]

hi,

i have a problem with my swap.

my engine not start. the starter is ok, fuel pump ok, ignition ok.

The engine not start because the injector not open. i have 12v on the injector and the resistor pack is ok. I have test my ecu on an other mr2 and the ecu is good.

Please help me (sorry for my english i'm french).

[arnaud_mr2]

injectors not pulsing fuel.

always is good but the probléme is ecu #1 #2 #3 #4.

I think that is a earth probléme on the ecu but i'm not find the probléme.

The earth harness is correctly connect on the manifold.

[djpkins]

I don't understand what fault codes your reporting...could it be your distributer...have you got a good spark on all 4 cylinders...is your ecu earthed out correctly...if not it could get damaged...hope the weather is better in France than over here...rain

[djpkins]

...you would get a better response posting this in the "mechanical" section matey