5th Official SW20 Big Brake Adapter Kit Group Buy
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 9202
- Joined: Tue Dec 14, 2004 12:15 pm
- Location: Crawley, West Sussex
- Contact:
5th Official SW20 Big Brake Adapter Kit Group Buy
Another Group Buy has been requested, so setting this up for those interested in the Big Brake Adapters.
Same goes as before....
This is the 5th Official Group Buy Thread for the Big Disc Conversion kit that I've designed.
Please ensure that you read, and acknowledge back to me that you have read and agree to the disclaimer, if you decide you would like to be included in the Group Buy. This disclaimer will also apply when goods are received by you. If you do not acknowledge your agreement you will not be included in the Group Buy.
Below is some information on the Big Disc Conversion kit:
- The Adapters will be CNC Machined from 6061 Billet Aluminium.
- The Adapters will then be Hard Anodised.
- Once the Adapters are complete, the kit will be sent out via Parcel Force to those who have purchased. (Non UK address will be Royal Mail Tracked & Insured)
- The full kit will comprise of:
2 x Front Brackets.
2 x Rear Brackets.
2 x Rear Disc Centering Rings.
Required Mounting Hardware.
If you don't require the whole kit you must clearly indicate this. Please state whether you require FRONT ONLY, REAR ONLY or FULL KIT.
I will leave this Group Buy open until the required number of names has been collected. Once all names are in I will contact you for a Delivery Address, and to arrange payment of the kit. All money will need to be recieved before the order is placed. I will keep participants up to date as production progresses.
Previous prices for the kits are:
FULL KIT : £180
FRONT ONLY : £95
REAR ONLY : £105
Please Note: GB Prices quoted are for UK Delivery only.
European is an additional £17.50/kit
Worldwide is an additional £30.00/kit
These costs are for Tracked & Insured delivery.
I am hoping to match this price, but will have to speak to the Machine Shop to confirm once the numbers are in.
To complete the Big Brake Conversion you will need to source the following:
1 Pair of Toyota Supra Twin Turbo "UK Spec" Front Discs (324mm) - use 1995 for part search - Guide Price: £149.50
1 Pair of Mazda RX8 "Sport" Front Discs (324mm) - use 2005 for part search - Guide Price: £112.65
Note: Some Motor Factors list them as 323mm discs and you will probaly be able to find them cheaper if you know where to look.
Disclaimer:
Any problems with parts and fittings purchased and received will belong to the individuals participating in the Group Buy.
No liability is placed on me, Anthony Onions or the Manufacturing Company, CC Precision Engineering.
This modification has been designed for, and is in use on my own car. The kit has not been, and will not be road tested prior to the purchase of the parts, fixtures and fitting so any liability of any kind will be the responsibility of the individual purchaser. Any adjustments required will also be the responsibility of the purchaser.
Details of my MR2 can be found on my website, dated 29/10/10.
My observations for which I am not liable:
A very small clean up of casting marks on the Caliper mounting points may be required.
The Rear Caliper Mounting points require modifying to fit the Adapters.
The Dust Shields will need to be trimmed or manipulated to allow fitting of the Discs.
Please reply to this topic with: "Username - Required Kit - Disclaimer Read & Agreed"
Thanks,
Ant
Here is the kit that you would receive:
Useful links:
Fitting them to my own car
Original Big Disc Conversion discussion thread.
1st Group Buy thread.
2nd Group Buy thread.
3rd Group Buy thread.
4th Group Buy thread.
Same goes as before....
This is the 5th Official Group Buy Thread for the Big Disc Conversion kit that I've designed.
Please ensure that you read, and acknowledge back to me that you have read and agree to the disclaimer, if you decide you would like to be included in the Group Buy. This disclaimer will also apply when goods are received by you. If you do not acknowledge your agreement you will not be included in the Group Buy.
Below is some information on the Big Disc Conversion kit:
- The Adapters will be CNC Machined from 6061 Billet Aluminium.
- The Adapters will then be Hard Anodised.
- Once the Adapters are complete, the kit will be sent out via Parcel Force to those who have purchased. (Non UK address will be Royal Mail Tracked & Insured)
- The full kit will comprise of:
2 x Front Brackets.
2 x Rear Brackets.
2 x Rear Disc Centering Rings.
Required Mounting Hardware.
If you don't require the whole kit you must clearly indicate this. Please state whether you require FRONT ONLY, REAR ONLY or FULL KIT.
I will leave this Group Buy open until the required number of names has been collected. Once all names are in I will contact you for a Delivery Address, and to arrange payment of the kit. All money will need to be recieved before the order is placed. I will keep participants up to date as production progresses.
Previous prices for the kits are:
FULL KIT : £180
FRONT ONLY : £95
REAR ONLY : £105
Please Note: GB Prices quoted are for UK Delivery only.
European is an additional £17.50/kit
Worldwide is an additional £30.00/kit
These costs are for Tracked & Insured delivery.
I am hoping to match this price, but will have to speak to the Machine Shop to confirm once the numbers are in.
To complete the Big Brake Conversion you will need to source the following:
1 Pair of Toyota Supra Twin Turbo "UK Spec" Front Discs (324mm) - use 1995 for part search - Guide Price: £149.50
1 Pair of Mazda RX8 "Sport" Front Discs (324mm) - use 2005 for part search - Guide Price: £112.65
Note: Some Motor Factors list them as 323mm discs and you will probaly be able to find them cheaper if you know where to look.
Disclaimer:
Any problems with parts and fittings purchased and received will belong to the individuals participating in the Group Buy.
No liability is placed on me, Anthony Onions or the Manufacturing Company, CC Precision Engineering.
This modification has been designed for, and is in use on my own car. The kit has not been, and will not be road tested prior to the purchase of the parts, fixtures and fitting so any liability of any kind will be the responsibility of the individual purchaser. Any adjustments required will also be the responsibility of the purchaser.
Details of my MR2 can be found on my website, dated 29/10/10.
My observations for which I am not liable:
A very small clean up of casting marks on the Caliper mounting points may be required.
The Rear Caliper Mounting points require modifying to fit the Adapters.
The Dust Shields will need to be trimmed or manipulated to allow fitting of the Discs.
Please reply to this topic with: "Username - Required Kit - Disclaimer Read & Agreed"
Thanks,
Ant
Here is the kit that you would receive:
Useful links:
Fitting them to my own car
Original Big Disc Conversion discussion thread.
1st Group Buy thread.
2nd Group Buy thread.
3rd Group Buy thread.
4th Group Buy thread.
Re: 5th Official SW20 Big Brake Adapter Kit Group Buy
I want at least one complete kit, maybe more.
-
- Posts: 121
- Joined: Thu May 01, 2008 4:41 pm
Re: 5th Official SW20 Big Brake Adapter Kit Group Buy
you g0t pm.
Last edited by franksmits on Sat Oct 30, 2010 6:13 pm, edited 1 time in total.
-
- Posts: 7172
- Joined: Thu Dec 16, 2004 6:39 pm
- Location: Oldham
Re: 5th Official SW20 Big Brake Adapter Kit Group Buy
Ant, if there's enough interest to go ahead, and there's need for the front set, do you want me to send you this set back?
476bhp & 415ft lb @ 1.9bar Magic by Ryan!
Gone, but never forgotten
Now with a mk1.5 & a NHB EP3
Gone, but never forgotten
Now with a mk1.5 & a NHB EP3
-
- Posts: 9202
- Joined: Tue Dec 14, 2004 12:15 pm
- Location: Crawley, West Sussex
- Contact:
Re: 5th Official SW20 Big Brake Adapter Kit Group Buy
Hi Steve, yeah if you don't get rid of them in time I'll have them back off you for same price.
-
- Posts: 7172
- Joined: Thu Dec 16, 2004 6:39 pm
- Location: Oldham
Re: 5th Official SW20 Big Brake Adapter Kit Group Buy
Top man Ant.
476bhp & 415ft lb @ 1.9bar Magic by Ryan!
Gone, but never forgotten
Now with a mk1.5 & a NHB EP3
Gone, but never forgotten
Now with a mk1.5 & a NHB EP3
Re: 5th Official SW20 Big Brake Adapter Kit Group Buy
If i dont use my car for a few weeks the brake disks will get rusted, what happens with the part of the brake disk that doesnt have any contact with the brake pad when this kit is installed? Wont it get rusted and never cleaned by the pads? That would look pretty silly, or am i missing something?
-
- Posts: 9202
- Joined: Tue Dec 14, 2004 12:15 pm
- Location: Crawley, West Sussex
- Contact:
Re: 5th Official SW20 Big Brake Adapter Kit Group Buy
Then don't get normal discs, get zinc coated ones to avoid being silly
-
- Posts: 7172
- Joined: Thu Dec 16, 2004 6:39 pm
- Location: Oldham
Re: 5th Official SW20 Big Brake Adapter Kit Group Buy
Or paint the untouched part of the disc in VHT paint up to the contact point.
Last edited by Steve Horrocks on Sun Oct 31, 2010 8:59 pm, edited 1 time in total.
476bhp & 415ft lb @ 1.9bar Magic by Ryan!
Gone, but never forgotten
Now with a mk1.5 & a NHB EP3
Gone, but never forgotten
Now with a mk1.5 & a NHB EP3
-
- Posts: 9202
- Joined: Tue Dec 14, 2004 12:15 pm
- Location: Crawley, West Sussex
- Contact:
Re: 5th Official SW20 Big Brake Adapter Kit Group Buy
Cheers Steve, another good idea
-
- IMOC Committee
- Posts: 11345
- Joined: Tue May 30, 2006 5:41 pm
- Location: The Toast Aisle
- Contact:
Re: 5th Official SW20 Big Brake Adapter Kit Group Buy
toxo - Full kit, front and rear - Disclaimer Read & Agreed
IMOC-UK - the only club to win 'Best Club Stand' at JAE more than once, and twice in a row!
-
- Posts: 9202
- Joined: Tue Dec 14, 2004 12:15 pm
- Location: Crawley, West Sussex
- Contact:
Re: 5th Official SW20 Big Brake Adapter Kit Group Buy
Coolio, thats 2, just need at least 3 more before an order can be placed.
-
- IMOC Committee
- Posts: 11345
- Joined: Tue May 30, 2006 5:41 pm
- Location: The Toast Aisle
- Contact:
Re: 5th Official SW20 Big Brake Adapter Kit Group Buy
Will have to take myself off the list unfortunately... 3BAR compression in cylinder 4 comes first
IMOC-UK - the only club to win 'Best Club Stand' at JAE more than once, and twice in a row!
-
- Posts: 4
- Joined: Thu Nov 18, 2010 3:31 pm
Re: 5th Official SW20 Big Brake Adapter Kit Group Buy
I'd take the full kit with shipping to Canada
MadMister2 Full Kit - Disclaimer Read & Agreed
MadMister2 Full Kit - Disclaimer Read & Agreed
Re: 5th Official SW20 Big Brake Adapter Kit Group Buy
Looks a good GB.
Could I ask an unrelated question though - who supplies your large bolts for this kit?
I have a set of PP RCA's with 1 bolt missing and the ones in your kit look very very similar.....
Thanks
Could I ask an unrelated question though - who supplies your large bolts for this kit?
I have a set of PP RCA's with 1 bolt missing and the ones in your kit look very very similar.....
Thanks
-
- Posts: 9202
- Joined: Tue Dec 14, 2004 12:15 pm
- Location: Crawley, West Sussex
- Contact:
Re: 5th Official SW20 Big Brake Adapter Kit Group Buy
What size do you need? I may have a few knocking about spare.
Re: 5th Official SW20 Big Brake Adapter Kit Group Buy
Thanks - I will measure it tonight.
I would have happily bought a set of RCA's from you, but as I am missing just 1 bolt it seems a bit uneccessary!
Rob
I would have happily bought a set of RCA's from you, but as I am missing just 1 bolt it seems a bit uneccessary!
Rob
-
- Posts: 9202
- Joined: Tue Dec 14, 2004 12:15 pm
- Location: Crawley, West Sussex
- Contact:
Re: 5th Official SW20 Big Brake Adapter Kit Group Buy
I never got round to making RCAs before breaking the MR.
Drop me a PM later with the thread size and length.
Drop me a PM later with the thread size and length.
Re: 5th Official SW20 Big Brake Adapter Kit Group Buy
For how long will this group buy go on? Is it closed and how many do you have on the list so far?
-
- Posts: 9202
- Joined: Tue Dec 14, 2004 12:15 pm
- Location: Crawley, West Sussex
- Contact:
Re: 5th Official SW20 Big Brake Adapter Kit Group Buy
No real names on it to speak of. Since leaving the MR2 I haven't really been chasing this much.
If there is a need for it, I would pick it up again.
If there is a need for it, I would pick it up again.