[Mk2] [Generic] honda starter button

[bolton]

Ok just drawn this out from the sketches I made at the time.

Hope it helps some of you.

Ant

Image Replaced With URL For Quote http://www.car13.net/tmp/mr2Wiring.jpg

So do you cut the wires on the toyota block connector or jus splice into them? Cheers

[bolton]

Ok just drawn this out from the sketches I made at the time.

Hope it helps some of you.

Ant

Image Replaced With URL For Quote http://www.car13.net/tmp/mr2Wiring.jpg

So do you cut the wires on the toyota block connector or jus splice into them? Cheers

[ancient mariner]

i didn't cut any wires, for the one that goes to the starter motor wire,i just stripped back about an inch of the wire covering and spliced in.
the earth wire i used an existing earth bolt.
and for the live wire,i put on a male spade ender,and connected it to the live terminal on the now not used cigarette lighter connector. paul.

[Scruff]

Sorry to dig up an old thread but i was just wondering if anyone knows which colour wires i should be splicing into for the push button start? The link on here for the diagram is dead.