How do you fix the 'Man in Dandism' mats to the floor?

[Frank Grimes]

My rev3 turbo still has the 'Man is Dandism' (WTF? LOL ) mats in it, but they move around all over the floor and sometimes they're perilously close to the pedals. They each have 2 holes in them, but I can't see how they would fix to the carpet - does anyone know?

[cosmos]

There is a Toyota mat clip on the drivers side let me know if you get one mine got lost after respray.

[Steve-O 2007]

I have the same problem lol each time I stop at lights I have to move it

[toxo]

I wondered about this, I've got an eyelet in my driver's side carpet but no way of fixing the mats to it!

[Steve Horrocks]

This has always puzzled me as well!
Think my best bet may be to get some Velcro strips?

[jmachling]

You usually get these coarse threaded plastic screws that come with aftermarket mats that just screw into the carpet beneath. No idea, but Halfrauds or somewhere else might sell them separately?

[Razor04]

the velcro idea doesnt work, i tried this recently, it dont stick to the carpet underneath the mat.

ive got the eyelet and mat holder, but the mat still moves around

[toxo]

So let me get this straight, there's a mat holder that's meant to clip into the eyelet that none of us seem to have?

[Razor04]

yes i have it on both dreiver and passenger sides, still dont do much though. it pops into the round hole in the floor just a peice o plastic stud sticks up through the hole in the dandy matts i'll do a pic later

[toxo]

Pretty sure my mats don't have a corresponding hole in them...

[Razor04]

yeah the clip is staggered and can swing around. The hole in the mat wont line up with the hole in the floor

##
#########
................##

clip looks like this ^^^^^ but in grey plastic

[Steve-O 2007]

Is it possible that these mats were made for a specific batch / model of 2's and thats why they dont line up with the hole in the floor?

Surely Toyota wouldnt have made a mistake like this in the design of the floor mats

I looked at my Apexi SAFC and foot to the floor I was only getting 78% throttle and was thinking WTF? moved the mat and I was getting 100%

[Scott Barton]

I have the plastic clip and it holds my Dandism mats down fine...no movement for me!

[Razor04]

Here you go peeps :




turns out i only got this on the drivers side, but i remember my rev2 Glimited having it both sides (g-limited has extra spec though)

[toxo]

My dandism mats definately don't have that hole... the plot thickens!

[Razor04]

cheap chinese copies? i thought all dandy's had the fixing hole?

edit: only the drivers side matt has the hole, passenger side matt has no hole (although my rev2 glimited had a floor fixing for it? odd)

i take it you got the hole in the floor though?

[toxo]

Always possible I guess - the driver's one is pretty well worn and they were in the car when it came over from Japan but that doesn't really mean a lot

[thebody]

My mats dont have the hole either !

[Marf]

Here you go peeps :




turns out i only got this on the drivers side, but i remember my rev2 Glimited having it both sides (g-limited has extra spec though)

Yep same on my tubby, only on the drivers side.

[craig]

I need these for my car. I have the hole in the mat and the carpet but no clip, slides around all over the place without it. Anyone got a part number?

Cheers