www.imoc.co.uk

For information and for future reference here are the part numbers all the bushes for the Bellcrank Selector (engine bay) and the Gear Selector in the Cabin. All parts a part from one are still available from toyota UK Cabin Gear Selector Bushings & Seats Part Numbers 33556-17010 (Nylon collar t...

This may be a little long winded but bear with me! 1993 Mk2 Rev2 SW20 e153 transmission (as the amercians call it) 2 weeks ago I couldn't get reverse, I could only access 1st 2nd 3rd 4th and 5th with a bit of effort. So we replaced the selector cable bushes with ball bearings...easy win!! all gears ...

Thanks for the help, any idea what sensor it actually is?

https://www.facebook.com/photo.php?fbid=10155449299370534&set=ms.c.eJwzNDA0NTUxsTSytDQxMDA1NtEzRIgYm2OIWKKIGBsYGBqCRAAD9g5K.bps.a.10155135357880534.1073741826.637550533&type=1&permPage=1 can someone show or link me to a picture to what bolts to use to fit this and how it fits together Th...

https://www.facebook.com/photo.php?fbid=10155449299390534&set=ms.c.eJwzNDA0NTUxsTSytDQxMDA1NtEzRIgYm2OIWKKIGBsYGBqCRAAD9g5K.bps.a.10155135357880534.1073741826.637550533&type=1&permPage=1 https://www.facebook.com/photo.php?fbid=10155449300110534&set=ms.c.eJwzNDA0NTUxsTSytDQxMDA1NtEzRI...

https://www.facebook.com/photo.php?fbid=10155449299400534&set=ms.c.eJwzNDA0NTUxsTSytDQxMDA1NtEzRIgYm2OIWKKIGBsYGBqCRAAD9g5K.bps.a.10155135357880534.1073741826.637550533&type=1&theater Its an open access folder on facebook (I dont know how to link images) Can someone post what the part lo...

Mines not the supreme example seen on the other thread, my restoration seems mundane in comparison, but nevertheless here goes.

I'm going to add pictures to this threat and if possible could you lovely forum members tell me where the part fits to or how to fit it.

https://www.facebook.com/photo.php?fbid ... =3&theater

no idea how to post image, but here[/url]

I'm losing the orange and going back to black and doing a lot of the prep work to reduce the tears when I get the bill. Anyway I've taken the front arches off and around where the suspension mounts to the body, not the actual top mount but the area around it. Has anyone repaired this? looking for ad...

Thats brilliant thankyou again. Ive just had a 8ft by 4 sheet metal delivered today. A plater who i work with has a a set of rollers guilotine and press so hes going to form a set for me. The rest is going to be used to patch up those horrid holes and reinforcement. I havent inspected the rear bumpe...

Thankyou that helps me out loads. Now i know what it should have looked before. Im just wondering why the centre section of the inner sill has no box section beyond the end one like most pictures of sill repair ive seen. Yours has a middle section. Is this due to different models? Or been taken out?

Thats giving in too easily. A car of that age i was expecting damage. Im going to be replacing the really bad parts and treat it as much as i can. If i did buy another car i would prob expect to find the same problems. The sils are the biggest problem so far. Im doing the majority of the work myself...

Cheers i'll PM them. I'm trying to figure how all of this

www.facebook.com/photo.php?fbid=1015418 ... =3&theater

joins the car, I haven't seen anything other than the outer sill before and certainly nothing this bad

I have removed the outer sills on my car to unearth a whole heap of problems RUST RUST and more RUST. I have cleaned away most of the rust and been left with well not a lot of inner sill. As I am welder and fabricator I thought I could tackle this myself. But now i am unsure as how to patch and stre...

www.imoc.co.uk/forums/viewtopic.php?p=1 ... e8fe50fecb

On the rev 2. Frame
The bar over the top - arb
Closest to the camera - tie bars?
Ones obscured by the frame & poking out - trailing arms?

Thanks for the reply, saved money there,just stuck with stock.

When I'm looking at the subframe there's the tie bars, what bars are on the other side? they all look pretty shot

Cheers

Exhaust DECAT I've seen loads of decat pipes on ebay and loads of decat systems including the mongoose one and was wondering given that the cat requirement date is Aug 1992 (and many are for 1993 onwards cars) why are so many of these being sold and are they passing MOT emissions? The reason I ask i...

The old system is rusted through apart from the manifold & its working out cheaper to go stainless from the manifold back rather than replace odd bits of system If you do decide to buy it make sure you confirm with the seller that it will definately fit your engine. I was looking at a kit from ...

The old system is rusted through apart from the manifold & its working out cheaper to go stainless from the manifold back rather than replace odd bits of system

Cheers for all the replies I'll be checking all those links out. I'm sure I'll get to 15 posts quickly with questions about random stuff.

What do you guys think of this

www.ebay.co.uk/itm/111343843113?ssPageN ... 1423.l2649