ABFlug Style Wide Flares Group Buy -

[CarBen Fibre Creations]

Hi guys,

Who would be interested in a group buy for our MK2 wide flares?

The flares are 50mm rear and 30mm front. They are based on the ABFlug design however we have extended them around the arch so they will sit nicely on a MK2 without the rest of the kti. They can also be cut and trimmed around any other kit.

Shop Link: http://www.carbenfibrecreations.co.uk/s ... &results=5

Photos:




RRP is £179.99

We can offer the following discount:

5+ 10% Off - £162
10+ 15% Off - £153
15+ 20% Off - £144
Plus shipping.

If you'd like to be added to the GB please add your name to the list below. GB will run till the end of April.

1.
2.
3.
4.
5.

[CarBen Fibre Creations]

1. James Mead (Facebook)
2. Menno Gerritsen (Facebook +15 Only)
3. Rob Blanchet (Facebook)
4.
5.

[Dod]

Hi ben im tempted to buy a set of these , just a couple of questions do you have to cut away the arches on the car aswell ? And would it be possible to fit them with allen key type stainless bolts or do they have to be pot riveted on mate ? Cheers

[DAN_REV1_TURBO]

Also interested.. I'm not sure on fitting to form with the Veilside kit though. But I really am not happy with my current arches... This could be an option. Add me on to the list, colour coded red and fettled maybe it will work.

[Rev3-MR2-Turbo]

I'm deffo in if we can get 15+

Dan I'm not sure if they would fit well with a veilside kit because of the rear bumper.

I might be wrong, can anyone do a photo shop?

[h20490]

1. James Mead (Facebook)
2. Menno Gerritsen (Facebook +15 Only)
3. Rob Blanchet (Facebook)
4. h20490
5.
6.

[DAN_REV1_TURBO]

Dan I'm not sure if they would fit well with a veilside kit because of the rear bumper.

I might be wrong, can anyone do a photo shop?

Yeah actually hang fire on adding me to the list.. I`m really not sure either.. If somebody would be kind enough to photo shop that would be great. Red and blended somehow or shaped to look in keeping with the bodykit.. They may just look totally wrong. My arches were rolled and flared, but some really tacky cr4ppy looking stuck on pieces on the arch which looks nowhere near the standard I expected at the time.. So I need to do `something` about them.

[JD]

Put me down. I do love my wheels is the only thing so would probably have to go wider/lower offset and say bye bye to by beloved SSRs

More dish though

1. James Mead (Facebook)
2. Menno Gerritsen (Facebook +15 Only)
3. Rob Blanchet (Facebook)
4. h20490
5. JD
6. ?

[CarBen Fibre Creations]

Thanks guys, if we keep going at this rate we'll be 15+ in no time

[CarBen Fibre Creations]

1. James Mead (Facebook)
2. Menno Gerritsen (Facebook +15 Only)
3. Rob Blanchet (Facebook)
4. h20490 (IMOC)
5. JD (IMOC)
6. Troy Van Dongen (Facebook)
7. Rev3-MR2-Turbo (IMOC 15+ Only)

[bri0905]

1. James Mead (Facebook)
2. Menno Gerritsen (Facebook +15 Only)
3. Rob Blanchet (Facebook)
4. h20490 (IMOC)
5. JD (IMOC)
6. Troy Van Dongen (Facebook)
7. Rev3-MR2-Turbo (IMOC 15+ Only)
8. bri0905 (IMOC)

[DAN_REV1_TURBO]

Screw it. I`ll take a set, I can always sell them if my idea doesnt work.

1. James Mead (Facebook)
2. Menno Gerritsen (Facebook +15 Only)
3. Rob Blanchet (Facebook)
4. h20490 (IMOC)
5. JD (IMOC)
6. Troy Van Dongen (Facebook)
7. Rev3-MR2-Turbo (IMOC 15+ Only)
8. bri0905 (IMOC)
9. D4N_V_U (IMOC)

[CarBen Fibre Creations]

Thanks guys, looking good so far.

If we hit 15 before the end of April I will start contacting people for money and anyone else wanting a set will qualify for the 20% off

[h20490]

How much wider are the wings just to get a rough estimate for the spacers that I would need to order?

[CarBen Fibre Creations]

Hi, sorry I thought that was on the advert. They are 50mm rear and 30mm front

[h20490]

Sweet cheers

[CarBen Fibre Creations]

10 people already, excellent!!! If anyone would like to share the thread on Facebook or another forum please feel free

1. James Mead (Facebook)
2. Menno Gerritsen (Facebook +15 Only)
3. Rob Blanchet (Facebook)
4. h20490 (IMOC)
5. JD (IMOC)
6. Troy Van Dongen (Facebook)
7. Rev3-MR2-Turbo (IMOC 15+ Only)
8. bri0905 (IMOC)
9. D4N_V_U (IMOC)
10. Cam Howieson (Facebook)

[CarBen Fibre Creations]

1. James Mead (Facebook)
2. Menno Gerritsen (Facebook +15 Only)
3. Rob Blanchet (Facebook)
4. h20490 (IMOC)
5. JD (IMOC)
6. Troy Van Dongen (Facebook)
7. Rev3-MR2-Turbo (IMOC 15+ Only)
8. bri0905 (IMOC)
9. D4N_V_U (IMOC)
10. Cam Howieson (Facebook)
11. Kevin Dakessian (Facebook)

[CarBen Fibre Creations]

Only 3 more to go

1. James Mead (Facebook)
2. Menno Gerritsen (Facebook +15 Only)
3. Rob Blanchet (Facebook)
4. h20490 (IMOC)
5. JD (IMOC)
6. Troy Van Dongen (Facebook)
7. Rev3-MR2-Turbo (IMOC 15+ Only)
8. bri0905 (IMOC)
9. D4N_V_U (IMOC)
10. Cam Howieson (Facebook)
11. Kevin Dakessian (Facebook)
12. Dan Stewart (Facebook)

[CarBen Fibre Creations]

2 more to go


1. James Mead (Facebook)
2. Menno Gerritsen (Facebook +15 Only)
3. Rob Blanchet (Facebook)
4. h20490 (IMOC)
5. JD (IMOC)
6. Troy Van Dongen (Facebook)
7. Rev3-MR2-Turbo (IMOC 15+ Only)
8. bri0905 (IMOC)
9. D4N_V_U (IMOC)
10. Cam Howieson (Facebook)
11. Kevin Dakessian (Facebook)
12. Dan Stewart (Facebook)
13. Thomas Wilson (Facebook)