[Mk2] [Turbo] Siemens Deka 850cc 11.8 ohm Injectors

Posts about anything do to with modifying your car such as fitting aftermarket parts, bodykit, or tuning the engine for more performance.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
mr2mitch
Posts: 301
Joined: Fri Sep 12, 2008 12:44 pm
Location: chard

[Mk2] [Turbo] Siemens Deka 850cc 11.8 ohm Injectors

Post by mr2mitch »

Hi,
Can anyone help here? We have these for sale, but I need to check if they can be used with the stock ECU? Could they be used with the PowerFC?
Can the injector resistor pack be removed and thus allow the use of these injectors?
From memory I reckon the stock injectors were low impedance 2.8 ohms.
Any help much appreciated!
Mitch
472hp MR2 Turbo -- Now Breaking
Top
Peter Gidden
IMOC Affiliated Trackday Organiser
Posts: 10506
Joined: Tue Jan 25, 2005 9:49 am
Location: South Yorkshire

Re: [Mk2] [Turbo] Siemens Deka 850cc 11.8 ohm Injectors

Post by Peter Gidden »

Use without resistor pack.
Top
mr2mitch
Posts: 301
Joined: Fri Sep 12, 2008 12:44 pm
Location: chard

Re: [Mk2] [Turbo] Siemens Deka 850cc 11.8 ohm Injectors

Post by mr2mitch »

Peter,
Thank you very much for your help.
:thumleft:
Mitch
472hp MR2 Turbo -- Now Breaking
Top
bobhatton
Posts: 3351
Joined: Fri Aug 25, 2006 9:34 pm
Location: Bodmin Cornwall

Re: [Mk2] [Turbo] Siemens Deka 850cc 11.8 ohm Injectors

Post by bobhatton »

But not with a stock ECU
Designer for turbo set ups on F1 cars, and Nitrous Oxide Systems of the USA in the 80s
Top
toyokid
Posts: 251
Joined: Thu Dec 16, 2004 6:46 pm
Location: North Yorkshire
Contact:
Contact toyokid

injecting opportunities

Post by toyokid »

You also need to check the diameter of the ends that fit into the rail,
there are 2,
Which I have found out to my cost!

I think they are JDM and European?

Stephen
Top
Post Reply

Return to “Modifications”