Removal of bulkhead heatshields

Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
robbie
Posts: 26
Joined: Wed Jan 18, 2006 6:57 pm

Removal of bulkhead heatshields

Post by robbie »

How easy is it to remove the two heatshields on the rear bulkhead of the engine bay?
Top
Quigonjay
Posts: 11294
Joined: Mon Feb 14, 2005 8:43 pm
Location: Blackburn

Re: Removal of bulkhead heatshields

Post by Quigonjay »

its not as easy as it looks with the engine in place
about 5 10mm bolts but 2 or 3 of them are very awkward to get to
Top
robbie
Posts: 26
Joined: Wed Jan 18, 2006 6:57 pm

Re: Removal of bulkhead heatshields

Post by robbie »

Thanks jay. I didnt think it was going to be straight forward, looked to easy :(
Top
Post Reply

Return to “MR2 MK2 1990 - 1999 NA & Turbo”