[Mk2] [Turbo] 1994 Rev 3: Just the Odometer has stopped working?

Anything and everything to do with mechanical issues with your Mk2

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
benny p
Posts: 200
Joined: Tue May 31, 2005 5:25 pm
Location: Manston, Kent

[Mk2] [Turbo] 1994 Rev 3: Just the Odometer has stopped working?

Post by benny p »

Hey guys,

Just noticed that my speedos odometer (within the last week or so) has stopped working???

I've just done a quick search and found nothing apart from people talking about complete units stopping. not part of it?

I'm guessing there is a jobby connection somewhere? Do you think i should just source a new speedo unit?

O it has been delimited too so the speedo reads in mph up to 180mph also.

Cheers guys,

Ben
Top
diycinema
Posts: 161
Joined: Sun May 13, 2007 12:12 pm

Re: [Mk2] [Turbo] 1994 Rev 3: Just the Odometer has stopped working?

Post by diycinema »

If you have de-limiter you'll probably find it behind the speedo cluster. The speedo sensor is on the back of the gear box, near the rear engine mount, that could also be the problem or a wire in between. If the needle is still moving it's almost definately a fault with the cluster.
Top
benny p
Posts: 200
Joined: Tue May 31, 2005 5:25 pm
Location: Manston, Kent

Re: [Mk2] [Turbo] 1994 Rev 3: Just the Odometer has stopped working?

Post by benny p »

ahh cheers mate, that makes sense really. The trip and needle still work so it must be there. I'll have a fiddle about to see if i can spot anything obvious! If not! a New speedo it is! Fab!

Cheers
Top
Post Reply

Return to “Mechanical”