[Mk2] [Generic] what gear knob have you got?

[Rhonsmr2]

if you've got an original then the longer rev 1/2 clips into a small o ring. unclip the base of the gaiter and unscrew the gearknob and remove the whole thing and you'll see it.

If its the stubby one, then there shouldnt be anything preventing it from coming off. Just hold the gaiter top firmly while you unscrew the knob

[marcnoonan]

Not too clear, but Ebay short shifter with chrome knob, hand sticks to it in the winter and removes skin in the summer, but'll be no problem once I get the remote engine start going.

[craig]

I have and like the stock rev 3 one

[JeffD]

This is what real TRD ones look like :-)

http://www.flashmetal.com/index.asp?fun ... r_knob.jpg

[Dale_V]

My modified rev3 shifter and TRD gearknob

[GTS 93]

My modified rev3 shifter and TRD gearknob

Image Replaced With URL For Quote http://url.photobucket.com/albums/v435/ ... CN2469.jpg

Image Replaced With URL For Quote http://url.photobucket.com/albums/v435/ ... CN2471.jpg

Mine is just like the one in this photo the small stumpy one. So you are saying it should just screw off yes??

Will try have a have another crack at it.

jerry!!

[ferrit]

This is what real TRD ones look like

http://www.flashmetal.com/index.asp?fun ... r_knob.jpg

Same as mine

[craig]

This is what real TRD ones look like

http://www.flashmetal.com/index.asp?fun ... r_knob.jpg

Had one of them, just sold it. Nice gear knob