Tintop Rev3 Mr2 - Ideal for Track project £500

MR2s for sale - all versions & variants

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
Ryan.g
Posts: 724
Joined: Mon Nov 13, 2006 1:42 pm
Location: Woodstock, Oxfordshire

Tintop Rev3 Mr2 - Ideal for Track project £500

Post by Ryan.g »

Hi All

Got one of my old Mr2's available for anyone who fancies building a cheap track car. The car has already hit a few tracks in which it drives great and has served me well as a daily drive for over 6 monthes but i need something more sensiable for a while now so its up for sale for cheap due to the problems listed below.

The car is a 1993 Rev3 2.0l Mr2 in tintop format.

Done 93,000 miles
12 Monthes Mot
5 Monthes Tax
New toyo T1R tyres fitted
Eibach springs

Apart from the above it is stock.

Image

Image

Image

Image

Image

Now the reason the car is so cheap is recently it has started to use a fair bit of water and i suspect the HG or Block has cracked. The car still drives fine but just needs topping up ever 150 miles to stop it over heating.

2nd hand 3sge engines are always available alot of the time free or for around £50 on sites like here and www.twobrutal.co.uk from people who have fitted 3sgte's or V6 engines so would be cheap to replace and then could be stripped out.

Has a couple of rust spots also on the offside sill but is only surface rust as i can sand it back to clean metal.

If your interested pop me a PM

£500

Ryan
Rev5GT
Posts: 1669
Joined: Mon Jun 19, 2006 9:13 pm
Location: West Yorkshire

Re: Tintop Rev3 Mr2 - Ideal for Track project £500

Post by Rev5GT »

Dibs.. YHPM
rossdymond3352
Posts: 1793
Joined: Mon Feb 05, 2007 1:47 am
Location: Hampshire

Re: Tintop Rev3 Mr2 - Ideal for Track project £500

Post by rossdymond3352 »

b0ll0cks dont tell me i missed it....2nd dibbs

Ryan pm me if Rash isnt interested please.
Ryan.g
Posts: 724
Joined: Mon Nov 13, 2006 1:42 pm
Location: Woodstock, Oxfordshire

Re: Tintop Rev3 Mr2 - Ideal for Track project £500

Post by Ryan.g »

Sold
rossdymond3352
Posts: 1793
Joined: Mon Feb 05, 2007 1:47 am
Location: Hampshire

Re: Tintop Rev3 Mr2 - Ideal for Track project £500

Post by rossdymond3352 »

Oh willy.
Rev5GT
Posts: 1669
Joined: Mon Jun 19, 2006 9:13 pm
Location: West Yorkshire

Re: Tintop Rev3 Mr2 - Ideal for Track project £500

Post by Rev5GT »

Car just been delivered- Cheers Ryan... :thumleft:

Will be breaking it so if anyone wants any bits off it let me know.. It has an aftermarket exhaust on also...

I will be keeping Bonnet / Full Interior and Bootlid/SPoiler - Everything else is up for grabs...

Cheers
Rash.
Peter C
Posts: 1635
Joined: Tue Dec 14, 2004 9:17 am
Location: Beaconsfield, Buckinghamshire

Re: Tintop Rev3 Mr2 - Ideal for Track project £500

Post by Peter C »

Rash wrote:Car just been delivered- Cheers Ryan... :thumleft:

Will be breaking it so if anyone wants any bits off it let me know.. It has an aftermarket exhaust on also...

I will be keeping Bonnet / Full Interior and Bootlid/SPoiler - Everything else is up for grabs...

Cheers
Rash.


Now on Auto Trader, up for £995!

Cheeky so and so!
Ryan S
IMOC Moderator
Posts: 10902
Joined: Sat Dec 10, 2005 1:32 pm
Location: Bonnie Dundee
Contact:

Re: Tintop Rev3 Mr2 - Ideal for Track project £500

Post by Ryan S »

Rash wrote:Car just been delivered- Cheers Ryan... :thumleft:

Will be breaking it so if anyone wants any bits off it let me know.. It has an aftermarket exhaust on also...

I will be keeping Bonnet / Full Interior and Bootlid/SPoiler - Everything else is up for grabs...

Cheers
Rash.


does it have a Dump?? i need one. dibs if so.
Peter C
Posts: 1635
Joined: Tue Dec 14, 2004 9:17 am
Location: Beaconsfield, Buckinghamshire

Re: Tintop Rev3 Mr2 - Ideal for Track project £500

Post by Peter C »

sheppy wrote:
Rash wrote:Car just been delivered- Cheers Ryan... :thumleft:

Will be breaking it so if anyone wants any bits off it let me know.. It has an aftermarket exhaust on also...

I will be keeping Bonnet / Full Interior and Bootlid/SPoiler - Everything else is up for grabs...

Cheers
Rash.


does it have a Dump?? i need one. dibs if so.


Dump valve?

It's an NA you tit!
Ryan S
IMOC Moderator
Posts: 10902
Joined: Sat Dec 10, 2005 1:32 pm
Location: Bonnie Dundee
Contact:

Re: Tintop Rev3 Mr2 - Ideal for Track project £500

Post by Ryan S »

Peter C wrote:
sheppy wrote:
Rash wrote:Car just been delivered- Cheers Ryan... :thumleft:

Will be breaking it so if anyone wants any bits off it let me know.. It has an aftermarket exhaust on also...

I will be keeping Bonnet / Full Interior and Bootlid/SPoiler - Everything else is up for grabs...

Cheers
Rash.


does it have a Dump?? i need one. dibs if so.


Dump valve?

It's an NA you tit!


you know somethin, i didn't even look!!! :oops: i jst read that it was being broken.
redmk1
Posts: 1352
Joined: Sun Mar 25, 2007 5:53 pm

Re: Tintop Rev3 Mr2 - Ideal for Track project £500

Post by redmk1 »

so someone offers other imoc members a good project car for £500 and someone off here buys it and sells it for £995 without doing anything to it??? and there xxxxxx traders!!! [-X
mr2readster

Re: Tintop Rev3 Mr2 - Ideal for Track project £500

Post by mr2readster »

Well lifes a BEEAAATCH so I gues people do anything to servive, especially these days ](*,) .
:)
Rev5GT
Posts: 1669
Joined: Mon Jun 19, 2006 9:13 pm
Location: West Yorkshire

Re: Tintop Rev3 Mr2 - Ideal for Track project £500

Post by Rev5GT »

well b4 you all start 'going on one' so to speak..... The car was bought initially to use as a donor car... I was going to take out the FULL interior including the dash/carpets, bonnet/bumper boot and wing to use for another tubby that i'd seen which was stripped out for track use.. However that car got sold and i then had this MR2 that i've bought from Ryan taking up space....

As Ryan will tell you I paid £500 for the car and another £250 to get the car recovered from Ryan's place to mine (was 360mile round trip for the recovery driver) + the £30 it costs to advertise leaves the car standing me at £780.

It IS up for £995 as i need the space as the car will no longer be stripped so if anyone want to buy it I will take back what it owes me and you are welcome to it.....!! If i go and advertise it for £800 i know no-one will pay the price as people always like to 'haggle' on price.. I am not making a profit on it or taking anything away from members as mentioned or hinted in the above posts..

Alternative i will take £650 and keep the boot/spoiler...

Any takers..????

Rash
mr2readster

Re: Tintop Rev3 Mr2 - Ideal for Track project £500

Post by mr2readster »

Any takers, Yeh ME!!!! :mrgreen: , speak to ya tomorow Rash :mrgreen: .
I'm thinking of buyng it and selling it on for £1500.

Anybody got any issue's, speak now or for ever hold thy silence =; :whistle: .
ci_newman
Posts: 386
Joined: Sat May 06, 2006 2:36 pm
Location: Basingstoke

Re: Tintop Rev3 Mr2 - Ideal for Track project £500

Post by ci_newman »

Rash, if you (or any other IMOC member) ends up stripping it for bits then please let me know as I'll be interested in the Eibach springs and alloys (and the shocks / topmounts if they are in a good condition).

Cheers :thumleft:
Image
Rowland
Posts: 2016
Joined: Wed Dec 15, 2004 8:36 am
Location: Leicestershire
Contact:

Re: Tintop Rev3 Mr2 - Ideal for Track project £500

Post by Rowland »

I'd of loved to have bought this and dropped in a V6 and used it as a runabout for a while...

:(
Rev5GT
Posts: 1669
Joined: Mon Jun 19, 2006 9:13 pm
Location: West Yorkshire

Re: Tintop Rev3 Mr2 - Ideal for Track project £500

Post by Rev5GT »

Rowland wrote:I'd of loved to have bought this and dropped in a V6 and used it as a runabout for a while...

:(


Still here and not been broken yet if you want it @ COST PRICE :)
Rogue
Posts: 4672
Joined: Tue Jul 30, 2013 12:02 pm

Re: Tintop Rev3 Mr2 - Ideal for Track project £500

Post by Rogue »

Rash wrote:
Rowland wrote:I'd of loved to have bought this and dropped in a V6 and used it as a runabout for a while...

:(


Still here and not been broken yet if you want it @ COST PRICE :)


...and I've got a freshly rebuilt V6 engine sitting in the workshop...

:lol:
darkwolf
Posts: 77
Joined: Sun Nov 12, 2006 5:59 pm
Location: wiltshire

Re: Tintop Rev3 Mr2 - Ideal for Track project £500

Post by darkwolf »

is this still for sale and how much and is it drivable
Rev5GT
Posts: 1669
Joined: Mon Jun 19, 2006 9:13 pm
Location: West Yorkshire

Re: Tintop Rev3 Mr2 - Ideal for Track project £500

Post by Rev5GT »

Sorry been sold as a donor for a V6 project.

Cheers
Post Reply

Return to “MR2s for Sale”