The car has been feeling lumpy until fully warmed up for a few months now, and will really hesitate when getting anywhere near boost for the first 20 mins of driving, and seems to be taking longer to warm up....
So im goin to order a water temp sonsor from camskill to see if it helps, but which one do i need? Its a rev2 tubby, year of manufacture 1992, so do i need the pre nov 92 one, or post Nov 92????
http://www.camskill.co.uk/products.php? ... 0s605p4332
or
http://www.camskill.co.uk/products.php? ... 0s605p4333
Any help would be appreciated....
[Mk2] [Turbo] Which sensor do i need?
Moderators: IMOC Moderators, IMOC Committee Members
Re: [Mk2] [Turbo] Which sensor do i need?
How long does it take for the temp gauge to get to normal temp?
Could just be the thermostat.
Could just be the thermostat.
-
raptor95GTS
- Posts: 6213
- Joined: Tue Dec 14, 2004 7:14 pm
- Location: glasgow
- Contact:
Re: [Mk2] [Turbo] Which sensor do i need?
do the front radiator pipes get warm? If not then I'd suspect thermostat as rob suggests
Re: [Mk2] [Turbo] Which sensor do i need?
Thermostat is only a month old, and it did this with the old one aswell....
Will check the front pipes 2morro tho.
Will check the front pipes 2morro tho.
-
toxo
- IMOC Committee
- Posts: 11345
- Joined: Tue May 30, 2006 5:41 pm
- Location: The Toast Aisle
- Contact:
Re: [Mk2] [Turbo] Which sensor do i need?
Not blueprint ones are they?
IMOC-UK - the only club to win 'Best Club Stand' at JAE more than once, and twice in a row!
- the only club to win 'Best Club Stand' at JAE more than once, and twice in a row!Re: [Mk2] [Turbo] Which sensor do i need?
blueprint? whats that mean...?
Im not sure where the old one was from, but this one was put on by Rogue recently.
Im not sure where the old one was from, but this one was put on by Rogue recently.
-
toxo
- IMOC Committee
- Posts: 11345
- Joined: Tue May 30, 2006 5:41 pm
- Location: The Toast Aisle
- Contact:
Re: [Mk2] [Turbo] Which sensor do i need?
Ah that's alright then, I'd expect Rogue to use a genuine Toyota item. There have been reports of blueprint thermostats sticking and/or opening at the wrong temperatures before which can lead to all sorts of problems.
There have been reports of blueprint thermostats sticking and/or opening at the wrong temperatures before which can lead to all sorts of problems.IMOC-UK - the only club to win 'Best Club Stand' at JAE more than once, and twice in a row!
- the only club to win 'Best Club Stand' at JAE more than once, and twice in a row!Re: [Mk2] [Turbo] Which sensor do i need?
whats the answer to the first question though as i am in need of exactly the same part, mines also a rev 2 on a K and i was confused as to which one to get....
...Re: [Mk2] [Turbo] Which sensor do i need?
dan i think that Camskill have marked it up wrong on their website, they must mean nov 93 (which is when the rev3's started).
I'd give them a call....
....for the continuity of the thread my hesitation issues were solved by tweaking the idle control screw on the AFM to make it run a little bit richer than previously (which im now asuming was set too lean, as it had been played with at some point by a previous owner...)
i never found out the answer about the water temp sensor, so i never bought one, which is lucky as that wasnt the cause of my problems....
I'd give them a call....
....for the continuity of the thread my hesitation issues were solved by tweaking the idle control screw on the AFM to make it run a little bit richer than previously (which im now asuming was set too lean, as it had been played with at some point by a previous owner...)
i never found out the answer about the water temp sensor, so i never bought one, which is lucky as that wasnt the cause of my problems....