807.8 bhp with 629.9lb-ft MR2!!!!!

[Will-Turbo]

HOLLY S#*T!!!!
Worlds most powerful MR2 (i think?)
Check this out guys (apologies if this link has been posted in the past... i'm new)

http://www.extremeboost.com/Jeffrey/Pro ... videos.htm

[Owen @ Kent Car Craft]

Yuppo,got my GT30 turbo kit from them,
Although he has been banned from the US MR2 Board for failing to meet customer deadlines and not providing goods etc etc,lazy ar$e.
Nice No's though!

[Baker]

maybe not. i have a vid of a mr2 doing a 9.9 second quarter mile, unsure of its power, it may even just be lighter.

[Nelo]

Nice numbers and all that but the main reason that nobody ever really kicked up a fuss about it being the most powerful MR2; certainly in North America, is that the guy built the car/engine with the money he basically stole from customers.

He is notorious on the US MR2 board and I personally think he's a waste of space.

[MR2Mania]

maybe not. i have a vid of a mr2 doing a 9.9 second quarter mile, unsure of its power, it may even just be lighter.

I've got that clip too, and it says it produces 700PS.

[steve b]

LB should be avoided, I ordered a downpipe from a trader that was selling his goods I waited 4 months pipe never materilised... then I cancelled my order. Fortunately I paid a 3rd party trader so they were apologeitc and refuded my money. I have every confidence that If i ordered direct I'd have never seen the pipe or my money again.

[Baker]

maybe not. i have a vid of a mr2 doing a 9.9 second quarter mile, unsure of its power, it may even just be lighter.

I've got that clip too, and it says it produces 700PS.

thats the one, bomex front. 2113cc engine

[craig]

Nice car! I also have the clip of the 9.9 1/4 mile '2

simply awesome!

[MR2Mania]

Nice car! I also have the clip of the 9.9 1/4 mile '2

simply awesome!

What gets me about that video clip is how easy it seemed. I mean, the car didn't seem to struggle putting the power down or anything!

Note, the terminal speed of that 700ps MR2 was about 150mph. So if that car produced 700bhp, how much (or little!) is LB's to do 11sec at 127mph? I'd guess at about 600bhp. Not bad, but I wouldn't say it's the most powerful MR2.

[stevecordiner]

I agree the terminal speed is what you need to look at

I think LB's new car is a 2.4 liter with a stupidly big turbo on it isnt it?

[Bender Unit]

Nice car and specs but the guy should be horse whipped for how he has treated customers - he is more concerned with doing up his car than sending the parts through to customers that have bought off him.

Regards

James

[MR2Mania]

Nice car and specs but

Really? How many people do you know with an ally crank? That's how technical this guy is!

[JAP BOY]

Will mate that aint the worlds most power full MR2! that only produces 650hp

[dude541]

im pretty sure that time was taken when it was pushing around 700bhp,
ive heard now that it has a full forged 2.4 with even bigger turbo!
expecting to produce close to 1000bhp!
but like i said this is only what ive heard from someone who speaks to lb quite regulary

[stevecordiner]

THe spec list on the all out drag car is as follows I believe

"Engine


• Customized Block With Darton Ductile Iron Sleves
• Cunningham Billet 4340 Steel Rod Set *91mm Stroke
• Custom JE 8.5:1 *89mm Bore Pistons
• Porting, Polishing, Valve Work, & Chamber Design by Dan Paramore Racing Heads
• OEM "Shimless Bucket" Conversion
• Ferrea Stainless Steel 1mm Over-Size Intake & Exhaust Valves
• Custom Cometic 1.0mm Head Gasket
• ARP Head Studs, Main Studs, & Flywheel Bolts
• GFB Light Weight Aluminum Crank Pully
• All Ceramic Coating Work by SWAIN Technologies
• Custom Titanium Retainer Set
• Toda 288 Intake Cam
• HKS 272 Exhaust Cam
• HKS Cam Gears
• HKS 85lb Valve Spring Set
• DRT Custom Aluminum Intake Manifold
• 75mm Mustang Throttle Body


Drivetrain


• RPS Twin Plate “Carbon Carbon” Clutch Kit (1800lb Pressure Plate)
• Kaaz 1.5 Way LSD
• 92' OEM Tranny
• Drive Shaft Shop Stage V Axle Kit
• Weld 10x15 AllumaStar Drag Rims (Track Use)
• Mikey Thompson 11.5"x15"x26" Drag Slicks (Track Use)


Turbo & Intercooler


• Customized Greddy Tubular Stainless Steel Exhaust Manifold
• Customized 4" Downpipe (No Muffler)
• Garrett Dual Ball Bearing GT4245R Ballistic Turbo Charger (80lb/min)
• Custom Sleved T04 .84 A/R Turbine Housing
• 3 Gallon Aluminum Water Reserve Cell
• TiAL 44mm Waste Gate - 2” Inlet, 2” Outlet to Atmosphere (Screamer)
• Spearco Dual Core Air/Water Intercooler System
• Jabsco Centri-Puppy Water Pump



Ignition & EFI


• Autronic SM2 ECU
• NGK R5671A-8 Plugs
• MSD DIS4 4
• MSD HVC Coils x 4
• Custom NGK Wire Set


Aero, Breaks, Wheels, & Suspension


• Custom "One-Off" Apex'i Drag Racing Coil Over Kit
• Racing Hart 17" Type C Tracer Rims (8.5" Front, 9.5" Rear)
• 92' OEM Brake Sizes with PowerSlot Rotors
• Endless CCX "Zeal" Brake Pads
• Border FiberGlass Front Bumper
• Border Carbon Fiber Hood
• Tom's FiberGlass Rear Bumper
• Greddy Polyurethane Side Skirts
• 95' Rear Tail Lights
• JDM Clear Corner Lights


Fuel System


• 2 SX EFI Carbureted In-Line Pump 0-90 PSI
• SX 35-90 PSI Dual Inlet Fuel Pressure Regulator
• -10 AN Stainless Steel Fuel Lines (From Tank to Pumps)
• -08 AN Stainless Steel Fuel Lines (From Pumps To Fuel Rails)
• -06 AN Stainless Steel Fuel Lines (From Rails to Regulator)
• -06 AN Stainless Steel Fuel Lines (From Regulator Back to Tank)
• 2 EB-TFR (eXtremeBoost Top Feed Rail Kit)
• 4 Delphi Top Feed 980cc Primary Injectors
• 4 Delphi Top Feed 780cc Secondary Injectors
• RCI 5 Gal Fuel Cell


Interior

• Custom 8pt Chrome Moly Cage
• Momo Race 320mm Steering Wheel
• Momo Carbon Fiber Shifter
• Momo Pedals.
• AutoMeter Carbon Fiber 52mm Water Temp Gauge (Din Panel)
• AutoMeter Carbon Fiber 52mm Oil Temp Gauge (Din Panel)
• AutoMeter Carbon Fiber 52mm Oil Pressure Gauge (Din Panel)
• Kenwood Single Din Deck


Misc.


• Custom Engine Lid Shroud With Dual 10" Spal Fans & Hydraulic Prop Rod.
• Custom "Hard Mounted" Engine Mounts.
• Custom JIC Coolant System"

[ENSMR2]

I've gott hat clip of the 9sec 2. Is it the orange one?

Man I was impressed with how evey time he changed gear and floored it the front end would just fly upwards! Impressive traction too. I'd like to know how he got all that power down so well.

[Chris \'aka rustboy\' Amm]

I've gott hat clip of the 9sec 2. Is it the orange one?

Man I was impressed with how evey time he changed gear and floored it the front end would just fly upwards! Impressive traction too. I'd like to know how he got all that power down so well.

i have the clip and obvious he's on proper drag tyres, check the profile of the tyres! and the fact they stick like xxxx! hardly any wheel spin as he nails it. if you read through the jap text you can make out the stuff the car is using, all off shelf and think he got about 900bhp

like the way you see the engine lid flap about near the end of the clip

[ryan]

Hmm, i've been wondering how the border bumper would look like with the GReddy sides. Looks good IMO. Fast car too!

[TBDevelopments]

Extremeboost haven't tested that new car yet. Hes going to be testing it in the up coming weeks.

The times produced before were when his car was running 640bhp something.

I was talking to him last night and at 1012BHP fly its believed to be the Most powerful mr2 in the world, Also the record i believe was 9.8 1/4 which he hopes to beat with this car.

Tim
xxxx