
un1eash wrote:Not to keen on the auto up mod, is there a built in load sensor to stop the window if somethings in the way?

Mine has this safety feature as my alarm has auto closure so because they run through the alarm if somethings in the way they'll stop.


If you look at the way the windows operate, there's no limit switches for up or down, it works on sensing the increase in current in the motors when the window reaches the end of it's travel, doesn't take much to stop it.

The closure modules for alarms work the same way

( at least the one I installed does

)
I looked at doing the passengers window and it could be done

.

.

.

.

.

.

.

.

.

.

.

.

but the problem is that it would involve installing another switch as there's no way of modifying the the switch on the drivers door to give a auto up function for the passengers window.

You will also need to install another relay for the passengers window as it doesn't have one.

With a bit of thought it should be possible to arrange it so that both windows go up and down

( at the same time) with the auto switch on the drivers door, if you could live with that.

I reckoned it was too much hassle and I'm happy with auto up/down on the drivers window and both windows closing when I lock the doors using the remote or the key
