[Mk2] [Turbo] How Hard IS It To Change A Rear Bumper?

Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
Mauler
Posts: 158
Joined: Tue Jul 04, 2006 12:50 pm

[Mk2] [Turbo] How Hard IS It To Change A Rear Bumper?

Post by Mauler »

Do they just unbolt/unclip and go back on the same way?


Ta :)
Martin F
IMOC Moderator
Posts: 14830
Joined: Fri Aug 04, 2006 1:19 pm
Location: The Couch !

Re: [Mk2] [Turbo] How Hard IS It To Change A Rear Bumper?

Post by Martin F »

mostly unbolt...lots and lots of bolts... :lol:
2Crooky
Posts: 3306
Joined: Tue May 09, 2006 11:34 pm
Location: Guildford

Re: [Mk2] [Turbo] How Hard IS It To Change A Rear Bumper?

Post by 2Crooky »

yup^^^^^^

Even when you have taken "all" the bolts off....there are probably 10 more :lol:

Wouldn't say its more of a b!tch than the front bumper...
Tsunami
Posts: 318
Joined: Tue Jun 06, 2006 10:45 am
Location: Cambridge
Contact:

Re: [Mk2] [Turbo] How Hard IS It To Change A Rear Bumper?

Post by Tsunami »

It's not so much bolts, as those popper things all along the top and bottom of the bumper.
Once you have those out, it is a lot easier if you can drop your exhaust, as there are four bolts (two each side) that are right sods to get to and will be rusty too.
If you can't get those out (as I couldn't) then you are putting all those poppers back in again :(
If at first you don't succeed...
give up skydiving!
Post Reply

Return to “MR2 MK2 1990 - 1999 NA & Turbo”