[Mk2] [NA] Name that part

Anything and everything to do with mechanical issues with your Mk2

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
Snakebitey2

[Mk2] [NA] Name that part

Post by Snakebitey2 »

Can someone please tell me the name of this part so i can buy new bushes 4 it thanx. ](*,)
Image
-:[KM]:-
Posts: 2221
Joined: Sun Feb 20, 2005 5:17 pm
Location: Nottingham

Re: [Mk2] [NA] Name that part

Post by -:[KM]:- »

Front tie-bar or strut-to-chassis bar...

http://www.twosrus.co.uk/index.php?cPath=25_33

If you've a Rev1, you might strike lucky. TwosRus are doing them for postage only...!!
Snakebitey2

Re: [Mk2] [NA] Name that part

Post by Snakebitey2 »

Unfortunatly its a rev 2 and im in need of the front tie bars either the bushes or a full replacement of the tie bars anyone know where i can get a set?
cheers
Zippy
Posts: 50
Joined: Tue Feb 22, 2005 5:29 pm
Location: Bolton

Re: [Mk2] [NA] Name that part

Post by Zippy »

That a Rev2+ tie bar.

Think you'll be lucky to find bushes for that - i suspect it'll be a new tie bar. I further suspect you'll only get it from toyota and i lastly suspect you'll need a tube of vaseline.

i reserve the right to be wrong about any or all of the above
-:[KM]:-
Posts: 2221
Joined: Sun Feb 20, 2005 5:17 pm
Location: Nottingham

Re: [Mk2] [NA] Name that part

Post by -:[KM]:- »

Fensport do TRD ones for £76.21.

Did you click on that link....? :-k

4th link down...

http://www.twosrus.co.uk/product_info.p ... cts_id=172

Scroll to bottom of page...

SW20 Rev2+ Front Strut Bars = £28.50

:-s
Snakebitey2

Re: [Mk2] [NA] Name that part

Post by Snakebitey2 »

hehe must have missed that 1 lol thanx 4 the help guys :D 8)
-:[KM]:-
Posts: 2221
Joined: Sun Feb 20, 2005 5:17 pm
Location: Nottingham

Re: [Mk2] [NA] Name that part

Post by -:[KM]:- »

Happy to help a newbie!!

:wink:
Snakebitey2

Re: [Mk2] [NA] Name that part

Post by Snakebitey2 »

Has anyone changed these bushes before? im having a few problems getting the old bushes out ](*,) Are they a press fit? any help much appreiciated :thumleft:
Snakebitey2

Re: [Mk2] [NA] Name that part

Post by Snakebitey2 »

cancel that lol press fit even the press struggled
jmachling
Posts: 3949
Joined: Wed Oct 26, 2005 8:49 pm
Location: Where the cider apples grow.

Re: [Mk2] [NA] Name that part

Post by jmachling »

To get the old bushes out you need to burn them out with a decent blow torch - very smokey and very messy.

Once the rubber's all gone, the bulbous metal tube in the middle will fall out and with luck you may be able to drift out the metal tube that contained the bush as there's a square cutout in it (you'll see what I mean when the rubber's all gone)

If it still won't budge, just hacksaw across that square cutout and it should pop out no probs.

Aftermarket ones (Prothane etc) should be a press fit - mine went in under finger pressure.

HTH
Snakebitey2

Re: [Mk2] [NA] Name that part

Post by Snakebitey2 »

yea tis sorted now didnt have 2 many problems, about 10 mins on the press did the job fine, and less smokey lol, and the new 1's literaly went on with no effort at all
Post Reply

Return to “Mechanical”