[Mk2] [Turbo] samco hoses full kit need pics

[les]

Hi, Has anyone got a pic of a full set of samcos on an engine, have trawled the garage but theres 81 pages to go through.

Cheers

Les

[Greddy-Matt]

Have a look about chap there's several threads going on this There's 3 Samco kits in total, Coolant, Ancillary and Turbo, + vac lines etc...
page 4 here:
http://www.imoc.co.uk/forums/viewtopic. ... 334#768334
Also
http://www.imoc.co.uk/forums/viewtopic. ... ight=samco
http://www.imoc.co.uk/forums/viewtopic. ... ight=samco

[Timsmr2]

This has the Ancillary and coolant kits, plus some other non samco silicone pipes.

[THE DUKE]

Tim where did you get the coolant housing to rad cap pipe from? Is it SFS?

[Greddy-Matt]

I thought the ancillary kit had that hose in it?
looks very nice tho

[THE DUKE]

Well i didn't get one in my kit

[Greddy-Matt]

Thought these were the ones in the ancill' kit:

Ancillary Kit
1086 heater core to engine
1087 heater core to engine
1088 filler cap to water tree
1089 engine to throttle body (lower)
1089a engine to throttle body (lower)
1090 reservoir overflow
1091 filler cap to reservoir
1092 bypass (?)
1093 turbo coolant hose

[john p]

Hi, the 1092 bypass hose you have listed, can you tell me where it fits.cheers.

[Timsmr2]

Tim where did you get the coolant housing to rad cap pipe from? Is it SFS?

Hi Sorry hadnt seen this yes it was in the Samco kit

[Timsmr2]

Hi, the 1092 bypass hose you have listed, can you tell me where it fits.cheers.

pretty sure its this one




its just below the coolant outlet housing

[RyanRs]

whos engine is that in the pic... ? looks very shiny!!

[Timsmr2]

The first pic (with the blue Samcos) is from my engine.

The second is from a site I found.

http://www.turbomr2.com

this was a really good resource for doing my own engine rebuild as the guy (Dave) has pretty much documented his whole build with a wealth of images in the How to section.

[RyanRs]

Ahhh turbomr2.com.. yes i should have realised.. have spent soo much time on that site.. used it as a guide to remove my engine.

[alan1150]

I've got a fair few samco's in my engine bay now. I only bought the air intake to turbo one, got all the others as either ready cut lengths or longer lengths which i cut myself.

See pic :

[Greddy-Matt]

Hi Alan do you have the part number for the intake please? I really dont want to have to buy the whole kit and only use that part

[alan1150]

I got mine from fensport and its the same one for all revisions. You just have to block of the biggest hole for rev's 3+. I turned up a aluminium bung at work that is a nice fit and secured it with a jubilee clip. I'm unsure of the part number it was on the bag that pipe came in (now in bin) if you contact fensport i'm sure you could find out. They were the only place which i found that sold this pipe seperate. Cost £115ish including vat and delivery if i remember right.

[alan1150]

You will also need to remove one of the hose nozzle bits that are in your existing black toyota hose, as the samco hose only has one bonded to it already.
I'd get a couple of new jubliee clips (70-90mm) as well if your going to buy this hose.

[Greddy-Matt]

Much appreciated