[Mk2] [NA] sills

[deek]

hi guys drivers side sill starting to hole was thinking of cutting out bad bit and fitting an offcut from a new sill only prob is i cant find a supplier any body no where i can get a new sill from

its a 1990 g limited na import drivers side

cheers guys

[RST]

Mr T or try JeffD. About £70 for a 1m long repair panel from T.

Pt No. 61411-17050, "Panel Rocker Outer". But can't remember what side that corresponds to (I can just make out the label on an old random photo I've got).

...Hopefully that will help you.

[Martin F]

hope your good at welding otherwise be prepared to add around another £400-£500 to that price

[JAP BOY]

I paid £500 each side including inner and outer sill panels also got the underneath stripped and 3 coats of underseal done so call it 1000-1200!!!!!

I'd defo recomend it being done mate as winters will speed the rust cycle up quickly!!!

[deek]

are you guys on drugs lol
we are talking 2 hours with a mig on the outer sill small patch 4 inches by 12 inches if thats the price you guys are paying i think i will go into buisiness welding mr2s lol

cheers for the reply guys l8r

[Martin F]

are you guys on drugs lol
we are talking 2 hours with a mig on the outer sill small patch 4 inches by 12 inches if thats the price you guys are paying i think i will go into buisiness welding mr2s lol

cheers for the reply guys l8r

so your only welding a small patch,

we thought you were replacing the whole sill's

[HighwayStar]

I had a bodyshop do a little patch in front of the rear wheels... £70 welded in and sprayed. Jobs a good 'un.

R.

[deek]

hi guys drivers side sill starting to hole was thinking of cutting out bad bit and fitting an offcut from a new sill only prob is i cant find a supplier any body no where i can get a new sill from

its a 1990 g limited na import drivers side

cheers guys

yeh just a small patch guys god you had me worried lol
im into painting so only need welding done hopefully wont cost to much