Driveshaft problems

Anything and everything to do with mechanical issues with your Mk2

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
zero
Posts: 40
Joined: Tue Dec 14, 2004 12:43 pm
Location: southampton

Driveshaft problems

Post by zero »

I have had a rattling sort of noise from the O/S rear wheel for a week or more.
So today had a good look to see if it was the bearing.
To my horror i have found 3 of the 6 bolts on the outer driveshaft have dropped out, and the remaining 3 were finger tight :eek:

While under the car i can now hear a clunk coming from were the driveshaft enters the gear box. Is this normal? (the car has LSD).

Any help appreciated.

Zero
Top
adam maclean
Posts: 670
Joined: Fri Dec 17, 2004 4:45 pm
Location: Neath South Wales
Contact:
Contact adam maclean

drive shaft trouble

Post by adam maclean »

I had that problem last september. Driving it one morning and heard a slapping sound from the wheel arch. Also found out that all but two of the bolts had fallen out and one had caught and buckled. They can be replaced easily enough. They should be put on with threadlock. Get it done asap and DON'T drive it in the mean time. As for the clunking, I dont think its normal. Any one lick to correct/agree with me? Ive had a clunking on mine and thought it was the shaft. Did some work on mine yesterday but its still there so im afraid i can't tell you too much im afraid.
Top
zero
Posts: 40
Joined: Tue Dec 14, 2004 12:43 pm
Location: southampton

Re: Driveshaft problems

Post by zero »

Thanks for the reply Adam.
I have put Loctight of the remaining bolts.
I will pick the rest up tomorrow.

It's just that clunking noise to worry about now :?

Zero
Top
Post Reply

Return to “Mechanical”