Moderators: IMOC Moderators, IMOC Committee Members
Icsunonove wrote:What's up with your old engine?
I thought it was very strong indeed.
I suppose its not really worth it in that way, but its something a bit different It is the only 4AGE that seems to be "Tim Proof" 
... 
Maybe even a decent burial by then Doesn't need an engine swap though, that's the only sound bit. Maybe we could leave the engine in place and swap the entire car round it. 
..... Sorry it took so long to confirm but I can really only have every other weekend off at the moment. Going to this means that I will not be able to go the Boxhill run the week before... But I was hoping to do this for a while now - any chance to learn a bit more about the Mk1 is fantastic!- would I still be able to come in the daily runner? (I don't know if I'll have time to get the Mk1 on the road prior to March at the moment - but will be working on her next weekend so should know for sure after then)(a couple of other complications at the moment) I actually can't offer my car anymore even for a small job - as nice as it would be to get all the small bits fitted... I'll probably have to tackle those some other time. Sorry if I've made a mistake somewhere... Tim, you've discussed the car coming, but how about you? ok - the list of people so far who can come on the day:pre event organisation(Kirsty)Need:monkeymax wrote:I'm now not sure if I'll have my Mk1 though
The show is indoors BTW so reasonably warm.Limeymk1 wrote:monkeymax wrote:I'm now not sure if I'll have my Mk1 though
You don't need to come in a Mk1 Max, all but the show car's get left in the car park.
- I thought so. But I just wanted to clarify it...'things to do' in the boot just in case we get stuck for something to do. I've got 2 new front wings to fit and paint and the two rear wings which have been welded on need tidying up and painting. Just need someone to get it there. 
- Gaydon to Singapore Overland www.go60sharing.co.uk+ might be available for helpage+ have a shiny mig welder too 
I think were going to need a bigger stand! 
(thanks to G and J's hard work), well, it just put the icing on the cake! 
Attendees:Pre Event organisation (Kirsty) Possible Projects:- Preparation work prior to respray / changing T-bar seals- Turbocharging his 4AGE engine! / engine swap / fitting new front wings / tidying up rear wings- Welding (what needs welding Anna?) / respray 
Stuff we'll need (or might need):(ideally wiith toe hook)??(current at Stuart Kynochs I think, Leicester)- Tom- Tom- Mark (Shish)Has anyone got access to a Transit Van and car trailer they could borrow? (Ideally you would not be a million miles away from Leicester - where the large display boards are kept)(i don't)?- will ask him if poss to borrow.
Pre Event organisation
Tom
Jo
Tiamat
lol(Kirsty) (Tom) his dad has an engine crane that we could borrow (its the one I do everytime an engine change is due), but i think its still attached to the plane hes building in his shed at the moment. I'll ask my friend - borrowed it before so should be fine if it's not going to be in use! - and I can bring it easily if the '2 doesn't come... I have an engine crane, compressor, ten tonne press, generator, full selection of axle stands, jacks, welder... the list goes on.'2 i can fit a lot in my trusty VW saloon. Just let me know what we need and i'll sort it.Icsunonove wrote:
without this the satnd can't go ahead - as this is a 'display' stand we need the display boards to be there.- quote needed, but should be okay for the club to fund [-o< at the help that has come forward, but remember i can only get 10 free entry passes, so first come first serve etc 
