Veering different ways

[massari]

When I drive in a straight line it veers slightly to the left, then when I break it goes left for a while, then right, then left etc.. and ends up pretty much in the same spot...

Also it seems to waver in accelerating through gears 2 and 3 at low revs, maybe the gear box is going too?
I've been told my "HT" leads need a change as they are "dodgy"
Any ideas?


The changes I have had done recently is;

front shocks,
front brake pads,
cam belt & tensioners,

front tracking and chamber check done,

I check the tyre psi regularly, I put them at 32 psi, it has 17 inch Kosei racer alloys on it.

[Ja99a]

Check the brake calipers on the front, they can become stiff and catch causing this pulling ..

I suggest stripping them down as if your going to fit new pads and using some copper grease in the guides (the two metal prongs).

Worth a try at least.

[massari]

The brakes were fitted by a garage and I could see what appears to be the copper grease all over it, so I think it would have been fitted properly???