Boot lid question (very important)

[Spittinflames]

Do the rev 2 and rev 3 have different layout's on the inside of the boot lid?

I really really need to know. or to put it another way would a rev 3 spoiler fit a rev 2 boot lid?

[Harry]

Yes the rev three bolt pattern is different so will not fit direct
rev three is a specific three bolt pattern

So rev 2 to 3 is different!

[gtech]

I THINK, physically the boot lids are exactly the same, you can stick a Rev 2 lid on a Rev 3 car and vice versa.

The spoiler is a different matter, I think the holes for the Rev 2 spoiler are in a different position to a Rev 3 spoiler, in which case some minor surgery would be required.

I am fairly sure that the holes left by the Rev 2 spoiler will be hidden with the Rev 3.........but dont hold a gun to my head on that one


HTH

[craig]

Do the rev 2 and rev 3 have different layout's on the inside of the boot lid?

I really really need to know. or to put it another way would a rev 3 spoiler fit a rev 2 boot lid?

If I'd have known that was all you needed to know, I could have told you that LOL.

The rev 3 and rev 2 boot lid bolt patterns are completely different.

[craig]

I T

I am fairly sure that the holes left by the Rev 2 spoiler will be hidden with the Rev 3.........but dont hold a gun to my head on that one


HTH

They would be visible as the rev 3 spoiler is only in contact with the boot lid at the ends of the spoiler.

The rev 1/2 boot has about 10 holes spanning the width of the boot lid.

[craig]

rev three is a specific three bolt pattern

6

[ENSMR2]

rev three is a specific three bolt pattern

6

3 each side?

[Harry]

But as the wing was bought at a good price this will allow budget for a wee
bodyshop work or a mate in the know can sort pronto.

[craig]

rev three is a specific three bolt pattern

6

3 each side?

yeah.

[ENSMR2]

6

3 each side?

yeah.

Maybe thats what he meant ?

lol

[Harry]

lo =D>

I better go and double check
Oh cheers for the update

Edit yes per side.

[Spittinflames]

no no maybe my wording was wrong.... Craig said that i may have trouble fitting the drift wing to a rev2 boot lid...... because its rev3 specfic.

I know theres different hole patterens but what i'm wondering is on the underside of the boot, is the layout different.... the metal structue.. like the second skin on the inside. If its the same through all revs then im not worried.

[Harry]

Help 'headcover' Dave where are you?

Rev 3 bootlid or modify?

[ENSMR2]

no no maybe my wording was wrong.... Craig said that i may have trouble fitting the drift wing to a rev2 boot lid...... because its rev3 specfic.

I know theres different hole patterens but what i'm wondering is on the underside of the boot, is the layout different.... the metal structue.. like the second skin on the inside. If its the same through all revs then im not worried.

It's the same, I'm pretty sure mate.

[Spittinflames]

Ahh dunna worry about it i'll sort it..... nothings impossible... a cut here a hole there, its all good.

Its just craig scaring the sh!t out of me.

[Spittinflames]

no no maybe my wording was wrong.... Craig said that i may have trouble fitting the drift wing to a rev2 boot lid...... because its rev3 specfic.

I know theres different hole patterens but what i'm wondering is on the underside of the boot, is the layout different.... the metal structue.. like the second skin on the inside. If its the same through all revs then im not worried.

It's the same, I'm pretty sure mate.

Cheers ENS.....

[ENSMR2]

Ahh dunna worry about it i'll sort it..... nothings impossible... a cut here a hole there, its all good.

Its just craig scaring the sh!t out of me.

If he's scaring the xxxx out of you on the forum then you don't want a late night drunken phone call from him mate!

[Spittinflames]

Ahh dunna worry about it i'll sort it..... nothings impossible... a cut here a hole there, its all good.

Its just craig scaring the sh!t out of me.

If he's scaring the xxxx out of you on the forum then you don't want a late night drunken phone call from him mate!

I bet he makes more sense when hes pi$$ed though

[craig]

FPMSL!!

[craig]

Ahh dunna worry about it i'll sort it..... nothings impossible... a cut here a hole there, its all good.

Its just craig scaring the sh!t out of me.

If he's scaring the xxxx out of you on the forum then you don't want a late night drunken phone call from him mate!

I bet he makes more sense when hes pi$$ed though

Last time I help you out