mk1 front spoiler

Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
robwsurf
Posts: 132
Joined: Fri Dec 17, 2004 7:38 pm
Location: leeds uk

mk1 front spoiler

Post by robwsurf »

the front spoiler below the main bumper part is that metal or grp etc like bumper?
User avatar
Lauren
IMOC Committee
Posts: 38632
Joined: Mon Dec 13, 2004 5:37 pm
Location: Greater Manchester
Contact:

Re: mk1 front spoiler

Post by Lauren »

on the early cars its metal.

on the late cars its GRP.

what year is your car?
robwsurf
Posts: 132
Joined: Fri Dec 17, 2004 7:38 pm
Location: leeds uk

Re: mk1 front spoiler

Post by robwsurf »

early 1985 think mines full of filler then on the corner have to get the welder out i guess!
User avatar
Lauren
IMOC Committee
Posts: 38632
Joined: Mon Dec 13, 2004 5:37 pm
Location: Greater Manchester
Contact:

Re: mk1 front spoiler

Post by Lauren »

robwsurf wrote:early 1985 think mines full of filler then on the corner have to get the welder out i guess!


Its metal then, like my 86 car:

Image
robwsurf
Posts: 132
Joined: Fri Dec 17, 2004 7:38 pm
Location: leeds uk

Re: mk1 front spoiler

Post by robwsurf »

should be but think the previous owner liked filler! thinking about welding it up or maybe vauxhall carlton bumper
robwsurf
Posts: 132
Joined: Fri Dec 17, 2004 7:38 pm
Location: leeds uk

Re: mk1 front spoiler

Post by robwsurf »

your car looks great by the way hope mine will someday! sorting out bodywork then i m going to respray it
System-G
Posts: 4554
Joined: Tue Dec 28, 2004 10:50 am
Location: Leicestershire

Re: mk1 front spoiler

Post by System-G »

Are the whole things available (as a panel)? I will be needing to replace mine some time in the not so distant future (as well as the front wings)... Is there a source for replacement panel and wings?

Bits I will need to replace:
Image
Image
Image

Sorry for hi-jacking post - but I think the information may be of use to us both :wink:
User avatar
Lauren
IMOC Committee
Posts: 38632
Joined: Mon Dec 13, 2004 5:37 pm
Location: Greater Manchester
Contact:

Re: mk1 front spoiler

Post by Lauren »

Cheers, Rob. I tell you my car wasn't that pretty in places when i got it.

The lip spoiler simply screws to the front valence.

I'm not sure on availibility of the spoiler and front valence, i guess all you can do is check with MrT. I'll bet its expensive though!

I don't know of anyone else that makes these repair panels.

I'm sure Paul would know.
robwsurf
Posts: 132
Joined: Fri Dec 17, 2004 7:38 pm
Location: leeds uk

Re: mk1 front spoiler

Post by robwsurf »

i havent found any suppliers yet, but i'm doing a full time classic car restoration course at the mo so when i get time i make my own.

for wings i d look for someone breaking rather than new panels too expensive!
System-G
Posts: 4554
Joined: Tue Dec 28, 2004 10:50 am
Location: Leicestershire

Re: mk1 front spoiler

Post by System-G »

When I was restoring my Corolla GTi, I found a place that made entire wings. I have lost his details and am also not sure if they would do wings for a MKI anymore. IIRC, the wings for the Corolla cost in the region of £45 each - so quite realistic.

Will need to boot up and traul through my old PC...

Just out of interest would anyone know if the panels would be the same size/fitment etc... on later spec MKI's to the earlier spec?
crazylegs
Posts: 2811
Joined: Tue Dec 14, 2004 4:13 pm
Location: Wiltshire

Re: mk1 front spoiler

Post by crazylegs »

the front valance is surprisingly not that expensive from mrT. cant quite remember but i think its about £45 each side.the one that fits over the other in the middle is about £3 more expensive?? i would keep my eye on ebay these do come up every now and then along with wings. yours is a bit of a mess but its an easy repair if you are any good with paint.
User avatar
Lauren
IMOC Committee
Posts: 38632
Joined: Mon Dec 13, 2004 5:37 pm
Location: Greater Manchester
Contact:

Re: mk1 front spoiler

Post by Lauren »

System-G wrote:When I was restoring my Corolla GTi, I found a place that made entire wings. I have lost his details and am also not sure if they would do wings for a MKI anymore. IIRC, the wings for the Corolla cost in the region of £45 each - so quite realistic.

Will need to boot up and traul through my old PC...

Just out of interest would anyone know if the panels would be the same size/fitment etc... on later spec MKI's to the earlier spec?


The wings are the same and i think the front valence is the same, but obviously the lip spoiler is different.
Post Reply

Return to “MR2 MK2 1990 - 1999 NA & Turbo”