All the details for my car

[splintermcinnes]

This is the full list of things ive got on the car, havent put it in the garage section, takes ages to enter it in one by one

Engine:
Revision 3 hybrid turbo (just the turbo, not the whole engine!!), with thrust bearing and enlarged internals - good for 350 bhp!
Apexi SAFC 2 - yet to fit.
HKS SSQV blow off valve
Apexi power intake induction kit
GReddy hard piped intercooler
Water mist injection kit 50/50 mix water/ethanol
Modified distributor cap and rotor arm with copper contacts
Spark plugs - grade cooler
Magnecore ignition leads
Steel head gasket
Top end gasket set
Stainless steel downpipe
Full 3” stainless steel exhaust system from downpipe back, with twin 4” exits
Chevy nock sensor
Fuel cut defencer

Suspension & Wheels:
GAB adjustable damping full suspension kit.
Camber adjustable mounts
Front strut brace
Rear strut brace
Team dynamics 17” twin six spoke alloys
Locking wheel nuts

Interior:
B&M short throw gear lever
GReddy Profec-B spec 2 digital boost controller
A-pillar mounted boost gauge
Simoni racing X5 steering wheel
MOMO steering wheel boss kit
Metal pedal set
Custom mats with MR2 Turbo decal and checker plate
Speedhut white dials
Sony chameleon head unit
VIBE K-series 6”components up front
VIBE 6”x 9”s in the cubby holds behind the seats
Clifford concept G600 Thatcham category 1 alarm with remote central locking and turbo timer

Exterior:
Side sills colour coded to body colour
Front lip spoiler from GTSchris from IMOC website
Revision 3 rear lights and centre panel
Single wiper conversion
Mirror tinted rear side and rear windows

[nakamura]

Jesus! Have you got any money left to put petrol in?

[splintermcinnes]

well thankfully, most of the mods have been done by a previous owner , iv still spent about 1500 quid on it though, still im off to the body shop to pick up the new bumper tommorow. the list of things i want still keeps rising though. still to come:-

piper cams
vernier pullies
Apexi power FC with the comander module
TEIN coilovers with adjustable top mounts
new alloys - kerbed mine a treat
Limited slip dif
few bits of body work

Oh, and some petrol!!!!!!

[craig]

Very nice spec mate!

[nakamura]

I must admit the money ive spent on mine i could have got an already modded one for less but such is life. Very pleased with mine.

[splintermcinnes]

One more mod! a TRD low temp thermostat!


been on the rollers the other day was well disapointed, was only pushing 0ut 211BHP!! something not right there! will be investigating asap! well as and when money allows!

[Quigonjay]

One more mod! a TRD low temp thermostat!


been on the rollers the other day was well disapointed, was only pushing 0ut 211BHP!! something not right there! will be investigating asap! well as and when money allows!

was that wheel hp or flywheel mate?
EDIT: ah, rev3 engine, so that will be whp?
what rpm/boost was that at?

[splintermcinnes]

Here's the print out.

[Quigonjay]

jeez, its flywheel
yep, something deffo very wrong there mate

[splintermcinnes]

could it simply be that with all the added stuff the ecu doesnt know what to do with its self!! do i need to get a programable one, coz i really cant afford it right now!!

[Quigonjay]

could it simply be that with all the added stuff the ecu doesnt know what to do with its self!! do i need to get a programable one, coz i really cant afford it right now!!

you need a health check up mate, not more mods
was it the previous owner who did the conversion? was the rev 3 ecu put in along with all the other gubbins/afm ditched etc?

[splintermcinnes]

this has confused a few people, i realy should edit the post!! its still a rev two block, it just has a rev3 hybrid turbo on it. and that was done by the previous owner, the AFM is still there, and its still all on the old rev2 ecu

[Quigonjay]

this has confused a few people, i realy should edit the post!! its still a rev two block, it just has a rev3 hybrid turbo on it. and that was done by the previous owner, the AFM is still there, and its still all on the old rev2 ecu

ok, so do you know what boost it made on this run?

[splintermcinnes]

oh, and just seen your edit, that was running 12psi.

[Quigonjay]

oh, and just seen your edit, that was running 12psi.

hmmm
well now we know a little more detail, it does seem a little down for the mods/boost, would have expected about 240/250 flywheel.
As you travel between portsmoth and scarborough i imagine you travel up the M1? why not pop in to peter giddens on your way past jct 37 and let him have a look?

EDIT: what fuel where you using btw? and did they have a fan on the intercooler?

[splintermcinnes]

ive heard his name a few times on here, hes pretty good then, you gat a contact number for him, or web site?
and i was running 99ron tesco fuel with the street octane booster from Noz

[splintermcinnes]

Righto, an update!!

i blew up the old engine as i got fecked off wth its unreliability! its now running:-

3VZ-FE 3.0 ltr V6 engine from the camry, fully detailed by Paul woods at woodsport.


some interior detailing:-

New rims arrived today and will be on the car monday!



cant wait to see these babys on the car. they are 18" alloys from the luxus IS200, they are on the upgrade list i think, got a bargin on ebay, brand new for 339Quid!!!!

and some pics of the car its self!





Matt

[nakamura]

[Flyin Donkey]

The wheels are lovely, they aren't lexus factory wheels but look tip top

They also do a silver version

[splintermcinnes]

well i have sorted the clearence issue out and cleaned her up, so this is her with her new shoes on.