Just wondering where I can get some sump pan sealer from? Do I need OEM toyota or is there another brand out there thats just as good?
Also can anyone reccomend a decent solvent to dissolve the sealant that is suck to the sump pan?
Cheers in advance
James
Sump pan sealer and remover ?
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 3835
- Joined: Wed Dec 15, 2004 1:15 pm
- Location: Sh*tting a Rainbow!
- Contact:
Re: Sump pan sealer and remover ?
Any high temp silicon sealent will do, so no need to pay the £60 Toyota ask for it!
Mikejc
Mikejc
Re: Sump pan sealer and remover ?
Hi,
I used some high Temp Sealant from Halfords last time. Worked a treat and only cost about 5 quid!
Paul.
I used some high Temp Sealant from Halfords last time. Worked a treat and only cost about 5 quid!
Paul.
Re: Sump pan sealer and remover ?
To get the old sealant off a sharp blade for the worst of it and a scourer (not the steel ones) for the rest, did the job for me.
Chris
Chris
Re: Sump pan sealer and remover ?
Any high temp silicon sealent will do, so no need to pay the £60 Toyota ask for it!
Geez...you guys are getting ripped off bad! I can pick up a tube of OE sealant from my local dealer for about $10-$12 US before discount.
There are some chemical gasket removers that you can use if you are very careful. I just use a razor and some fine grit sand paper.
Re: Sump pan sealer and remover ?
Clear instant gasket from your local motorist discount place ! Cost me £5 ! Never had a problem with it !
|| S256SX Airwerks Powered MR2 Turbo || V10 BMW M5 ||
-
- Posts: 410
- Joined: Thu Dec 16, 2004 8:53 am
- Location: Newcastle Upon Tyne
- Contact:
cork gasket
sealer a nightmare to get off, and you want it all off to get a nice seal witht the new stuff.
or...............
use a gtschris bottom end gasket kit which comes with a bespoke cork gasket!
or...............
use a gtschris bottom end gasket kit which comes with a bespoke cork gasket!
Re: Sump pan sealer and remover ?
use a gtschris bottom end gasket kit which comes with a bespoke cork gasket!
Do you have more info on this? I can't seem to find it on your website.
Thanks
JP
-
- Posts: 410
- Joined: Thu Dec 16, 2004 8:53 am
- Location: Newcastle Upon Tyne
- Contact:
Re: Sump pan sealer and remover ?
redvalkyrie wrote:use a gtschris bottom end gasket kit which comes with a bespoke cork gasket!
Do you have more info on this? I can't seem to find it on your website.
Thanks
JP
my suppiers back open 4th jan be ordring stock then as i am sold out drop me an email if you need a kit.
Pics going on website during next update in a week time or so.