Going to see car tomorrow, need some advice.

Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
prezjamin

Going to see car tomorrow, need some advice.

Post by prezjamin »

Hi guys,

I am going to look at a 1994 (rev 3) Black GT-Turbo Tbar tomorrow, any pointers on what to look out for ?

Here are the details, what do you think. Good or Not ?

Imported it as a personal import through Newera about 3 years ago - At the time it had 27k miles on the clock, but now it's done about 58k. Serviced fully by Toyota on arrival, and it's been serviced to schedule by a local import specialist ever since.

It has a _big_ single exit exhaust & an HKS Super PowerFlow intake, so about 260 bhp, plus 16" alloys, clear front indicators, Scorpion thatcham 1 alarm and an English kenwood stereo - otherwise it's pretty much standard GT Turbo T-bar spec. None of that stuff affects my insurance incidentally. Mechanically it's perfect, not a single problem in 3 years.

Cosmetically the alloys could do with a polish, there's a small mark on the driver's seat (was there when got it, I just never got around to getting it fixed)

£4000-4250

What do you guys think ?
ENSMR2
Posts: 12008
Joined: Tue Dec 14, 2004 10:35 am

Re: Going to see car tomorrow, need some advice.

Post by ENSMR2 »

Sounds good for that price. Too good? anyone? Are you sure its a rev 3?
Ed
Posts: 1268
Joined: Tue Dec 14, 2004 11:54 am
Location: Aberdeen

Re: Going to see car tomorrow, need some advice.

Post by Ed »

Sounds OK. Have a look at Bens' <A href="http://www.btinternet.com/~netsurf/mr2t ... ml">Buying Guide</A>. It's very informative and I used it as reference when buying mine. Also unless you are mechanically minded then get an RAC or AA car check to be on the safe side. That should insure you don't get a car that breaks down 2 seconds after you buy it.

HTH ED
prezjamin

Re: Going to see car tomorrow, need some advice.

Post by prezjamin »

Sounds too good was my initial thought as well, but i am new to all this. He says its a 94L (Rev 3) i dont have any pictures here at work, but i will stick some up when i get in tonight.. Just out of interest how does the RAC/AA car check work, do they come along with you to view the car or something ?
shafster

Re: Going to see car tomorrow, need some advice.

Post by shafster »

prezjamin wrote:Sounds too good was my initial thought as well, but i am new to all this. He says its a 94L (Rev 3) i dont have any pictures here at work, but i will stick some up when i get in tonight.. Just out of interest how does the RAC/AA car check work, do they come along with you to view the car or something ?


you have to book a date and time with them before hand and then they come out and give it the once over and present you with a report at the end of it.
Kieron
Posts: 561
Joined: Fri Dec 24, 2004 12:13 pm
Location: Back room....

Re: Going to see car tomorrow, need some advice.

Post by Kieron »

Sounds alright. I'd question the mileage though..... Look at the wear on the seats, steering wheel, gear know etc. Find out if it's had a belt change - and get proof....
craig
Posts: 43936
Joined: Sat Dec 18, 2004 3:44 am

Re: Going to see car tomorrow, need some advice.

Post by craig »

Damn, that is an awesome price mate!!!

Make sure it is a rev 3 though and not a rev 2 in rev 3 guise!

HTH

Craig :wink:
wizzer
Posts: 163
Joined: Fri Feb 04, 2005 1:32 pm
Location: Manchester

Re: Going to see car tomorrow, need some advice.

Post by wizzer »

Following on from a comment there about AA/RAC inspections, what are people's experiences of having checks done on MR2s (particularly turbos). Are the AA/RAC familiar with the cars and the problems that are likely to happen with them?
Post Reply

Return to “MR2 MK2 1990 - 1999 NA & Turbo”