Essex RR II Dyno Table

[CosmosblueMR2]

ok peeps..
I'll start the ball rolling and keep the table updated (hey I will start off at top of the tree ! )

those who went reply back with your WHEEL HORSE POWER and we will use this for the table here (wheel hp is obtained by looking at your dyno plot... not the numbers printed at the top (those are fly guestimates).


I'll keep updating the below table as and when people reply with their RWHP results.


1. Mark Edwards 288RWHP 270.9ft/lbs
2. Nick 279BHP 268ft/lbs - Built by his own fair hands !
3. Andy K (Andy) 261RWHP 279ft/lbs
4. Mel 259RWHP 282ft/lbs
5. Rory 243RWHP 263.7 ft/lbs
6. Ginga 240RWHP 254 ft/lbs
7. Bry 237RWHP 253ft/lbs
8. CosmosblueMR2 (Frank) 237RWHP 251ft/lbs
9. JimGTS 200RWHP 266ft/lbs
10. Ducatichick (becci) 146RWHP 145.3ft/lbs
11. Poohbear 119RWHP 144ft/lbs
12. BenF 102RWHP 119ft/lbs.
13.
14.



etc etc.....

[Andy K]

Ok, wish they had printed the figure, did for 2 traces, why not the third


1. Andy K (Andy) 261RWHP 279ft/lbs
2. CosmosblueMR2 (Frank) 252RWHP 251ft/lbs
3.
4.
5. etc

[KiwiMR2]

Andy K.....your specs say turbo conversion, what turbo are you running?? or did you mean you had a NA converted to turbo?? Your unichip is all tuned etc.?

Cheers
KiwiMR2

[Poohbear]

119 RWHP 144ft/lb

[Andy K]

Yes, was a G-Ltd, but I dropped in a similar age 3SGTE (ct20b)myself a few years ago. http://www.imoc.co.uk/forums/kb.php?mode=article&k=55
Chargecooler went in a couple of weeks back, Unichip only on Monday.

[Bry]

237rwhp 253ft/lbs

[CosmosblueMR2]

237rwhp 253ft/lbs

damn you Bry... beat me by 2ft/lbs
(can't beleive how similar our runs were )

... well untill you go CC and then you'll leave me behind again

[Bry]

237rwhp 253ft/lbs

damn you Bry... beat me by 2ft/lbs
(can't beleive how similar our runs were )

... well untill you go CC and then you'll leave me behind again

still debating wether or not to go down that route Still got standard timing aswell

[BenF]

A massive 102 bhp at the rear wheels and 119 ft/lbs of torque in the Mk1a

(Frank - note the torque figures are estimated @ Flywheel and not measured at the wheels ..)

[Mark Edwards]

I got 288rwhp and 270.9lb/ft

[ducatichick]

146 rwhp @ 145.3 lbft

[jimGTS]

200wheel, 266lb or torque!!!
good torque.

however clearly something robbing me of some power!
(nur spec, WOOHOO!!! AWSOME!!!)
compression test and valve test on the way.

[KiwiMR2]

I got 288rwhp and 270.9lb/ft

So close to the magic 300 !! are you happy with that?? what you were expecting?? what boost did you run??

Cheers
KiwiMR2

[Bry]

Nick 279rwhp 268 ft/lbs

[Rory]

243 RWBHP and 263.7 LBft torque

Rory

[CosmosblueMR2]

243 RWBHP and 263.7 LBft torque

Rory

hi mate - nice to meet you again on Sunday !.. hope you enjoyed the day

what boost were you running ?.. I'm just trying to get my bearings with my figs you see..

[Bry]

Mel 259rwhp 282ft/lbs

[poyntesm]

Frank,

Just had a thought...provided you all put your results into your vehicles in the garage it should be pretty easy to have the dyno table displayed in the garage like the normal one..we could have a list of RR days and clicking on them will produce the table for that day.

Since 90% of the code all exists within the garage already this would be a very easy thing to do. No point in my doing if you guys do not want it though. So what do you think Frank?

[Rory]

hi mate - nice to meet you again on Sunday !.. hope you enjoyed the day

what boost were you running ?.. I'm just trying to get my bearings with my figs you see..

I was running 16psi. Im happy with my result though! What a great day! Im still grinning from my result! 312bhp (fly) sounds great!

Rory

[CosmosblueMR2]

Frank,

Just had a thought...provided you all put your results into your vehicles in the garage it should be pretty easy to have the dyno table displayed in the garage like the normal one..we could have a list of RR days and clicking on them will produce the table for that day.

Since 90% of the code all exists within the garage already this would be a very easy thing to do. No point in my doing if you guys do not want it though. So what do you think Frank?

I think it's a great idea Esmond =D>

People .. get updating your profiles !