headgasket on my tubby why ???????

Anything and everything to do with mechanical issues with your Mk2

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
Cwill83247

headgasket on my tubby why ???????

Post by Cwill83247 »

Thanks for all your replys - quick question.

I need to get it to a garage will driving it do any more damage - the car hasn't overheated so assuming at moment head must be fine.

Or would you advise breaking down and getting in towed with my RAC cover...


Hi

Well I have had my rev 3 turbo for 3 months and it looks like,

well the headgasket has gone ( all symptons smokey, white gunk under filler cap)


Any idea's of Cost to get this done by a garage ? & how long should it take

Why do head gaskets go and what can i do to prevent it in the future -
(3rd mr2 and 3rd head gasket what am i doing)

Any recommended garages in south wales

Thanks

Totally gutted Chris
Last edited by Cwill83247 on Tue Oct 11, 2005 7:44 pm, edited 1 time in total.
adam maclean
Posts: 670
Joined: Fri Dec 17, 2004 4:45 pm
Location: Neath South Wales
Contact:

South Wales member.

Post by adam maclean »

Ah a fellow Welsh man, and I can't belive that you also have a silver grey Turbo (Also look on deadhumancollectors profile :wink: ). Where in south Wales are you from? I've only had work done around the Swansea/Carmarthen area and Im sorry to say that the only good one has been head hunted by Toyota in Carmarthen. Im sure you'll be able to find someone in the Cardiff area.

I do recommend you check these people out thoroughly though I've found most of the recommended around here can only talk a good job. Best of luck to you. :)
Cwill83247

Re: headgasket on my tubby why ???????

Post by Cwill83247 »

I am based pontypridd area, may see you at a meet if getting headgasket done doesn't wipe me out..
adam maclean
Posts: 670
Joined: Fri Dec 17, 2004 4:45 pm
Location: Neath South Wales
Contact:

V-spec

Post by adam maclean »

If you live in Ponty have you tried V-spec performance? I know they're mainly Honda and Nissan tuners but they are highly recommended and they did tell me they can get parts for MR2's. Maybe they'll be able to work on yours or point you in the right direction at least.
matt*79
Posts: 475
Joined: Fri Apr 15, 2005 4:45 pm
Location: oxford

Re: headgasket on my tubby why ???????

Post by matt*79 »

well the headgasket has gone ( all symptons smokey, white gunk under filler cap)


Is that the coolant cap found in the engine, or the petrol cap? :oops:
Cwill83247

Re: headgasket on my tubby why ???????

Post by Cwill83247 »

the oil filler cap ....
blue2
Posts: 3013
Joined: Wed Jan 26, 2005 2:12 am
Location: The Wirral

Re: headgasket on my tubby why ???????

Post by blue2 »

Firstly the ehad gasket failure could be due to a number of reasons so the best thing to do is take it to a good garage and they will find out the cause. You have to find out what caused it, fix that, and then replace the head gasket or it will just fail agian and cost you a fortune. Sorry if Im stating the obvious but you would be suprised how many people just get the gasket replaced without looking for the cause.
Sure someone will recomend a gargage near you. Hope this helps :D
dansREV2turbo
Posts: 1844
Joined: Tue Jul 26, 2005 11:24 pm
Location: wilts

Re: headgasket on my tubby why ???????

Post by dansREV2turbo »

what can cause the hg to go? i know the water pump can cause it but what else?
the mechanic that is doing my car said they can "just go"! :-k
Cwill83247

Re: headgasket on my tubby why ???????

Post by Cwill83247 »

dansREV2turbo wrote:what can cause the hg to go? i know the water pump can cause it but what else?
the mechanic that is doing my car said they can "just go"! :-k


Dan how much did they charge you ??????
dansREV2turbo
Posts: 1844
Joined: Tue Jul 26, 2005 11:24 pm
Location: wilts

Re: headgasket on my tubby why ???????

Post by dansREV2turbo »

not finished yet, i supplied the full gasket replacement set and cam kit at the same time , its going to be costing me 5-600 quid
JasonB
Posts: 282
Joined: Wed Apr 06, 2005 11:27 am
Location: Llantrisant, South Wales

Re: headgasket on my tubby why ???????

Post by JasonB »

Sorry to hear about your problems. regarding a decent garage in the South Wales area - I was looking for a timing belt done on my turbo (didn't fancy messing around in s0d all space myself) and in the end I used D&J motors on the Colchester Avenue estate in cardiff, I think they charged about £160 with belt. Spoke to many others including V-spec and they all wanted over £200 with the possibility of more if there were problems with tight bolts, knackered tensioner etc.
Not sure about a head gasket but I'd definitely go there again - apparently they're ex Nissan main dealer mechanics who went out on their own.
Might see posing thru taff street when you've sorted it out.

JB
Cwill83247

Re: headgasket on my tubby why ???????

Post by Cwill83247 »

Hi thanks for the garage - I will give them a bell and see what they say.

May see you around - I live in tonteg so not far.

I will let you all know what the cost is
steve b
Posts: 3238
Joined: Sat Dec 18, 2004 1:49 pm
Location: Trackdays in the South
Contact:

Re: headgasket on my tubby why ???????

Post by steve b »

REV3's have metal headgaskets, I've not heard of, well any failing before.
'02 VX220 2.2 n/a Daily driver - Exige Size TD 1.2 - TAT shorty Diffuser - HardTop - Chris Tullet 4-1 Manifold.

'97 mk1 Mazda Eunos Turbo track car with 260bhp/ton - soon more as Chris Wilsons going to build me an engine over the winter :o) .
Cwill83247

Re: headgasket on my tubby why ???????

Post by Cwill83247 »

steve b wrote:REV3's have metal headgaskets, I've not heard of, well any failing before.


Steve everyone keeps telling me this but it looks as if it has gone....

White smoke and very lumpy running, you can see the water droplets from the exhaust as it is leaking slightly at the flexi bit

It creates a little pool of water...

Any ideas on what creates the white smoke...
adam maclean
Posts: 670
Joined: Fri Dec 17, 2004 4:45 pm
Location: Neath South Wales
Contact:

Turbo

Post by adam maclean »

Its not the turbo is it? Does the smoke come out constantly or when you boot it, or idling after a drive.
speedtwelve
Posts: 19
Joined: Wed Jun 08, 2005 9:28 pm
Location: 300 miles south of Edinburgh

Re: headgasket on my tubby why ???????

Post by speedtwelve »

White exhaust 'smoke' is steam due to coolant entering cylinders through HG leak.

Have you done a hydrocarbon 'sniff test' on the coolant with an emissions tester? Worth doing before you pay for the head to come off...

ST
Post Reply

Return to “Mechanical”