[FINALIZED] CR Racing/ PWR Barrel Cooler

[rev2rich]

I am coming to the end of build and some goodies have not been used so this is up for grabs

6"x 6" core size Barrel cooler made buy CR racing which is a part of the PWR group ( sold in the U.S )

Link to their site
https://www.crracing.com/barrel_interco ... nletoutlet


I was going down the normal route of boot mount set up but decided I would try and save as much as the boot as possible so the car could carry some thing rather than being completely impractical (trying not to lose argument with my wife lol )

Size Dimensions

Inlet - 3 inch - 76 mm
water Inlet - half inch ID - 20mm OD
Core - 6" x 6" - 150 mm x 150 mm
Total length - 15" - 38 cm


Photos











Condition
Overall Good but a few marks on it as it is aluminum it is easy to mark.. could be buffed out if you spent some time on it

Price
I am asking for £200 on IMOC and £250 On ebay I think this is a good price + P&P

Thank you for looking Richard

[rev2rich]

bump

[Gullzter]

Surprised this thing is still hanging about, I've got the bigger one and it works a treat.. Top range stuff right there for not a lot of money!

[doeboy]

Hi what sort of power can this support please?

[rev2rich]

I was going for about 400 ish....

[doeboy]

Is I the same as the pwr 6x6?
As this states it's good for 525bhp

[rev2rich]

Is I the same as the pwr 6x6?
As this states it's good for 525bhp

Yes it is the same but..

I never truly believe in numbers on these items as you never know how they get to that number.... was it on a dyno.. what car was it on...what time of year ect so I got it for my 400 build

Hope that helps

[doeboy]

I've Ben looking at the 6x6 for my build, I'm aiming for around 500bhp on high boost, but need my engine in before I decide finally, that won't be till mid January all being well so if it's still around and works for me I will be in touch.

[rev2rich]

[Essex2Visuvesi]

Couple of questions:-

What it is the overall length?
What size threads are the water hose fittings?

[rev2rich]

PostPosted: Sun Jan 08, 2017 11:38 am Post subject:
Couple of questions:-

What it is the overall length?
What size threads are the water hose fittings?

Size Dimensions

Inlet - 3 inch - 76 mm
water Inlet - half inch ID - 20mm OD
Core - 6" x 6" - 150 mm x 150 mm
Total length - 15" - 38 cm

The water inlet is a push fitting not threaded

[Essex2Visuvesi]

PostPosted: Sun Jan 08, 2017 11:38 am Post subject:
Couple of questions:-

What it is the overall length?
What size threads are the water hose fittings?

Size Dimensions

Inlet - 3 inch - 76 mm
water Inlet - half inch ID - 20mm OD
Core - 6" x 6" - 150 mm x 150 mm
Total length - 15" - 38 cm

The water inlet is a push fitting not threaded

Thanks for that.... to long for my needs

[rev2rich]

Still have this... open to offers as I need the room

[doeboy]

My engine should be in next week so I'll have a idea if this'll work for me by then.

[Feedback Bot]

This Sale has been completed. The Buyer was tehdub