Manifold and downpipe

[Tsukijin-Akiyama]

For a g-limited Rev 1 t bar N/A 3gse

The manifold on our second project has seen better days and needs to be replaced along with the downpipe

There is a seller on eBay with two separate auctions but both say 3sfe

Do these also fit 3gse or does anybody have any advice on where we would be able to purchase the right ones at a reasonable price?

Thankyou - Suki

[abovetherim]

Hey Suki
Post a wanted ad in the parts wanted section.
You could try ringing SBits or TCB.
I don't think the fe manifold fits
Don't be tempted by the generic shiny ones on ebay as you will lose power and torque.

[Tsukijin-Akiyama]

Ah don't ruin my life I wanted to get a shiny one 😂

Not fussed about performance, it was meant to be a present for the other half who also decided to rescue an mr2 , she was perfect but the exhaust has fallen off in several places.

I'll give those places a ring and if not I'll put an ad up, Thankyou 😘

[Draven]

Don't be tempted by the generic shiny ones on ebay as you will lose power and torque.

That and when they rupture and break due to very bad quality welds.