17 Work Emotion T7Rs

Front:

8j ET32, with Bridgestone Potenza S001 215/40- nearly new tyres

(see photos).

Rear: 9j ET38, with Bridgestone Potenza S001 245/40

nearly new tyres

(see photos).

The offsets are ET32,38

-

great fitment for the MR2, particularly as theyre a recommended offset to accommodate coilovers with 17 8j and 9j widths.

These alloys really are a fantastic finish/colour, which the photos dont do justice.

Theyre much better in the metal.

I wouldnt be changing these alloys

if it wasnt for the fact I managed to get hold of some Advan SA3rs, which have always been my preferred

alloy wheel

for the 2.

Included in the sale:

The alloys come with six centre caps.

Two of the centre caps are raised for the rear alloys, to give extra clearance from the axel bolt.

However, they do not fit over the axel bolt with the standard ET38.

I ran the rears with 5mm spacers and extended wheel bolts, which meant the rear centre caps fitted perfectly.

However, with the ET reduced to ET33 the rear tyres caught the wheel arches very slightly with the stock suspension.

I was planning to have the rear arches rolled, or see how I got on with coilovers fitted.

As mentioned, the option is there to run the rears at ET38 without the centre caps and without spacers, or extend wheel bolts.

The front centre caps fit perfectly with ET32, without the need for spacers.

I have two spare centre caps that are boxed and have never been used.

One individual centre cap cost

£25 new

(Driftworks).

I had two custom alloy spigot rings made for the rears that arent tapered.

This was to ensure the rings engage the lip of the hub properly with the use of spacers.

There are two standard plastic spigot rings for the fronts.

They come with Black Work locking nuts which cost

£75 new

(Driftworks), still in original pack.

The alloys are in great condition, as the photos show.

The sticker on the inside of the wheels gives the manufacture date, so you can see they are relatively new wheels and confirm the specs.

There is some slight kerbing on the front passengers side alloy, shown in the photos.

£500
pick up only.
























