Heating control centre panel

Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
BALDYMONSTER
Posts: 581
Joined: Fri Aug 29, 2014 7:39 am

Heating control centre panel

Post by BALDYMONSTER »

Are these interchangeable between the rev 1 and rev 2?
JohnnyC
Posts: 7001
Joined: Tue Dec 14, 2004 10:25 pm
Location: West Yorkshire

Re: Heating control centre panel

Post by JohnnyC »

AFAIK, yes.
Although there's different ones for climate control (JDM), aircon (rare UK option) and non-aircon.
Image
rev3gtturbo
Posts: 424
Joined: Mon Jan 30, 2006 10:31 pm

Re: Heating control centre panel

Post by rev3gtturbo »

Sometimes Toyota change designs mid-production run (eg aerial units on rev3 turbos).

Not sure about the import climate control units... I have had 2 cars with these and one does just what I want and other kinda mucks about for a while and is less responsive with the temperature control. :-k

Both units look the same from the front. I dont think it needed a re-gas as it could do quite a cool temp when it felt like it, but it preferred to do something a bit more cosy or try and slow cook me #-o
Mechanic familiar with mr2s looked at it and couldnt find anything wrong.
alanmr2turbo
Posts: 2238
Joined: Wed Nov 28, 2007 7:08 pm
Location: Birmingham
Contact:

Re: Heating control centre panel

Post by alanmr2turbo »

REV1 were cable driven REV2+ were electronic
JohnnyC
Posts: 7001
Joined: Tue Dec 14, 2004 10:25 pm
Location: West Yorkshire

Re: Heating control centre panel

Post by JohnnyC »

alanmr2turbo wrote:REV1 were cable driven REV2+ were electronic

That's for climate control only right?
I've no idea what car BALDYMONSTER has 8-[
Image
BALDYMONSTER
Posts: 581
Joined: Fri Aug 29, 2014 7:39 am

Re: Heating control centre panel

Post by BALDYMONSTER »

My car is a uk Rev 2 UK no air on and the other heating control unit is out of a Rev 1 no air on either.
madbasshunter
Posts: 2029
Joined: Sat May 16, 2009 11:23 pm
Location: Cullompton

Re: Heating control centre panel

Post by madbasshunter »

alanmr2turbo wrote:REV1 were cable driven REV2+ were electronic


I found that I could attach the cables onto the rev2+ (led converted) with screws and it works :wink: I will get pictures when I have the dash back apart.
RyanRs wrote:
Skywalker wrote:explain how the coolant leaves the expansion tank and goes back into the coolant system?


Seriously , you don't know the answer to this? and you call yourself a car mechanic :shock:
Post Reply

Return to “MR2 MK2 1990 - 1999 NA & Turbo”