[Mk2] [NA] Mr2 Sills

[MR2 Turbo Boy]

I'm interested, depending on costs..

[wilkie senior]

Ill chase the quotes up been fliping manic

[raptor95GTS]

yeah defo interested

[acf8181]

Kind of on topic....but whats the best stuff to spray down into the sills to prevent rust build up? Mine have slight surface rust down there (i removed the sponges)

[ChrisW]

Dynax S50 is good stuff. You might also want to remove the boot lining and spray some into the wheel arches - mine had a bit of surface rust.

[acf8181]

Dynax S50 is good stuff. You might also want to remove the boot lining and spray some into the wheel arches - mine had a bit of surface rust.

cheers...good idea, will do that

[androo007]

Dynax S50 is good stuff. You might also want to remove the boot lining and spray some into the wheel arches - mine had a bit of surface rust.

cheers...good idea, will do that

Dynax is cracking stuff. I did both sills liberally and rear arches with about 2/3 of a can. The guy said I'd need 4 so I've got bloody tons of the stuff

[acf8181]

Dynax S50 is good stuff. You might also want to remove the boot lining and spray some into the wheel arches - mine had a bit of surface rust.

cheers...good idea, will do that

Dynax is cracking stuff. I did both sills liberally and rear arches with about 2/3 of a can. The guy said I'd need 4 so I've got bloody tons of the stuff

LOL, wanna sell us a can or two?

[swin]

made mine out of toyota middle sill and welded an end piece on




got loads of photos of my repair will get them all online

[swin]

sill in place


cost a lot more than the other sill options but the profile is as should be

[androo007]

cheers...good idea, will do that

Dynax is cracking stuff. I did both sills liberally and rear arches with about 2/3 of a can. The guy said I'd need 4 so I've got bloody tons of the stuff

LOL, wanna sell us a can or two?

Ping me a PM

[Wathall]

I need these sills were can I get the and how much ?

[Siriusxx]

any news here?

[Chumbaside]

Need to do my nearside

Any news on whether you are able to get these made?

-Mark

[Siriusxx]

Got this from Mr2-ben.co.uk just now

"We have had these manufactured in full length , including the door step, we have had the demo set fitted with great success and now just awaiting these to be delivered from the factory any day.
Kind regards"

" you watch our facebook we will be updating there shortly with these. Or if you give us an email or call in about a week we should be able to update with price."


Great news!!

[wenguin]

anyone know if there will be a group buy discount available for them?

[Siriusxx]

Dont know, i will ask them if this is possible.

[markyj1969]

I'm interested depending on price

[Siriusxx]

They will give us a group buy! Admin: maybe Move this post or pin it at top
I will have the info in the beginning of next week

[Herts66]

Also up for a set - mine are fine at the mo but usefull to have a set for futureproofing!