Anyone Run a Turbo with no boost?

Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.

Moderators: IMOC Moderators, IMOC Committee Members

2mad
Posts: 5983
Joined: Sun Feb 28, 2010 12:11 pm
Location: uk

Re: Anyone Run a Turbo with no boost?

Post by 2mad »

jimGTS wrote:
Marf wrote:
jimGTS wrote:

+1

min you can run is 7psi or 0.5bar

sure you can feather around 0-0.2bar or whatever, but foot down, hi-ish rpm you will reach 7psi.


Assuming you don't have a big exhaust. on my setup (naughty naughty t.b.d downpipe, fujitsubo RM01a exhaust) under full throttle I saw 7psi until 5000 RPM or so, then it crept to 11psi.



oh for sure, most will creep a little with a downpipe and/or exhaust.
some creep alot!



Yeah mine would creep till i ported it (posted pics in the past) .. after .. 0.5 to the redline .. very stable boost after porting regardless of boost pressure :thumleft:
Post Reply

Return to “MR2 MK2 1990 - 1999 NA & Turbo”