Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.
Last owner has cabled tied the brake lines to coilovers, standard lines.
Looking online it says this should not be needed with BC coilovers
Any thoughts.
gerbil1028 wrote:Last owner has cabled tied the brake lines to coilovers, standard lines.
Looking online it says this should not be needed with BC coilovers
Any thoughts.
A photo or two will help to see what you have got and why it is not fitted the right way
Designer for turbo set ups on F1 cars, and Nitrous Oxide Systems of the USA in the 80s
Will check it over properly later when at car. But previous owner seems to have cine above calipers then cable tied to coilovers and taken downwards to calipers
So as last owner cable tied to coilover and I can't see anywhere am I just blind?
Have not looked that hard yet I admit. Winder if he just lost all the clips and cable tied instead ?
Can't believe I am going to admit this.
All brackets are present And correct the cable tied wires I was looking at was the abs sensor wires.
Let the p1$$ take commence.