Hi,
I see there is a shim bank for mark 1's, is there one for the mark 2's rev 3 shim under bucket?
I've lapped some new valves in and the clearances are now zero on the intake side!
Thanks
Laurie
[Mk2] [Turbo] Shim Bank - Mark 2 Rev 3
Moderators: IMOC Moderators, IMOC Committee Members
Re: [Mk2] [Turbo] Shim Bank - Mark 2 Rev 3
Just FYI, the shims from some old Peugeot engines fit perfectly. I'm using them on mine.
-
- IMOC Affiliated Trackday Organiser
- Posts: 10506
- Joined: Tue Jan 25, 2005 9:49 am
- Location: South Yorkshire
Re: [Mk2] [Turbo] Shim Bank - Mark 2 Rev 3
Big L wrote:Hi,
I see there is a shim bank for mark 1's, is there one for the mark 2's rev 3 shim under bucket?
I've lapped some new valves in and the clearances are now zero on the intake side!
Thanks
Laurie
There isn't a Mk2 equivelent.
I have my own shim bank of many hundreds of over and under shims.
PM me your requirements and i'm sure we can come to a deal.
Re: [Mk2] [Turbo] Shim Bank - Mark 2 Rev 3
Hi Mark, thanks for the info, I'll look into that.
Hi Peter, I'll need to work out the sizes this week then I'll be in touch, thanks.
Hi Peter, I'll need to work out the sizes this week then I'll be in touch, thanks.
Re: [Mk2] [Turbo] Shim Bank - Mark 2 Rev 3
For anybodies information, the shims are through hardened so can be ground down if required.
Re: [Mk2] [Turbo] Shim Bank - Mark 2 Rev 3
Thanks for updating this has answered one of many questions I had!
Re: [Mk2] [Turbo] Shim Bank - Mark 2 Rev 3
No problem DB Mr2, a test engineer / chemist at work cut one up for me