hesitation/struggling around 3000rpm??

[DanT]

when i try to accelerate up to about 3000rpm its like hitting the limiter/pulling way in 5th gear.

i know it doesnt rule it out..but leads,plugs,dizzy and most sensors were replaced withing the last year..so was lambda sensor,coilpack etc.

how likely is it to be one of those still? or any other ideas?

i have checked around the tb etc and no obvious signs of loose pipes etc

[DanT]

i am planning to replace the lambda sensor first as seems this could be the most likely cause

[daz364]

when was the last time any of the components where changed if I was putting bets on I would say coil pack had the same problem just under fuse box mine was cracked so started hesitating on boost changed it it was fixed.

HTH Daz

[danjama]

Sounds like a seized caliper.

[DanT]

I don don't think a seized caliper is gonna make the engine hesitate lol

[Nic]

NA or Turbo and what year?

Were the ignition parts fitted genuine Toyota parts? Was the car running okay before? anything done to the car before it started playing up eg. part fitted or car washed etc.? Is it firing on all cylinders?

[danjama]

Woops!

[DanT]

NA or Turbo and what year?

Were the ignition parts fitted genuine Toyota parts? Was the car running okay before? anything done to the car before it started playing up eg. part fitted or car washed etc.? Is it firing on all cylinders?

All Toyota parts

Nothing has been changed. .only thing I can think of is as a one off I got the car washed at local polish place and they may of sprayed water in the Bay. .as it was day after that it started playing up

[Peter Gidden]

NA or Turbo and what year?

He's not telling. They're a secret.

Error codes?

[DanT]

Sorry it's a rev 3 na 3sge

Not showing any eml lights

[Peter Gidden]

Error codes?

[DanT]

Wouldn't the eml light flash if it was sending an error?

It also hunts at idle and stalls if you don't keep revs up

[Peter Gidden]

Wouldn't the eml light flash if it was sending an error?

Only when you check for error codes.

[DanT]

got a lambda to go on,if that doesnt solve it ive sourced a new coilpacl

[Peter Gidden]

Error codes?

I promise not to ask again.

[DanT]

theres a guide somewhere on how to check them..i guess it would make sense to see if its throwing any lol..

sorry wasnt ignoring you..just had my blinkers on lol