[Mk2] [Turbo] abs fault code clearing

[mr2targa]

please can some one help me as i am having alot of trouble clearing the fault codes. i am bridging e1 and tc and i get the abs light on constantly and the p/s light flashing but after pressing the pedal 8 time in 3 sec i cant get it to clear.

[racingrepairs]

Have you tried pulling the battery positive for a min ?

[mr2targa]

I tryed a hard re set but will give it another go. If there is any one in norwich who can sort it let me know

[racingrepairs]

I am in norwich

Will do some head scratching

[mr2targa]

any one else who know how to clear the codes

[racingrepairs]

Pm Luke skywalker!

[mr2targa]

why?? just need to get it sorted so i can get the car mot done and then put her up for sale

[racingrepairs]

Because he will know exactly what to do!

[Kinsy]

It's not clearing because the ABS ECU is throwing it's own code, probably due to a wheel speed sensor being dead.

You need to read the ABS ECU fault codes, not the Engine ECU.

There's a plug in the frunk you need to disconnect in order to get the ABS ECU to give up it's fault code.

[mr2targa]

i have read the fault codes and got code 35 n/s/f or o/s/r sensor replaced the o/s/r sensor and checked the sensors and the fronts match each other and the rears match. but when trying to clear the codes i cant get ant thing to happen.