Rev4 V6 - NOW BREAKING

[riot68]

Haha, for sure...

[jasongtr]

my new seats that i picked up yesterday

[craig]

Nice mate, what they out of?

[jasongtr]

no idea but they have got mr2 runners/subframes

[craig]

no idea but they have got mr2 runners/subframes

Even better! nice find

Think they're out of an evo4:

[jasongtr]

thats the ones, going to get them retrimmed to match the dash retrim, got them for what i considered a good price

[craig]

Cool, even better having the hard work of the runners attached already done!

Looking forward to see the re-trimmed seats and dash from x-edge.

Going to look so

[jasongtr]

i know it will look mighty fine

[kayjay0_7]

Love the Recaro's , they'll look even better once retrimmed to match the interior

[jasongtr]

finally got round to finishing off the wiring today, one wire in particular was foxing me, i knew what it was for and where the other end was but the end i was looking for just wasnt there, so a call to Mr Paul Woods was made and after a few minutes a solution found, and it lives and runs, whilst i never did the original conversion in the old car and have `just` reshelled this one the first start up is a magical thing. Still shed loads to do, need to bleed the clutch next so it can be moved.

[toxo]

Good news

Give me a shout if you need a hand, I'm off work for a few days and at a loose end!

[jasongtr]

well i have 4 new ball joints, 2 new steering rack boots, rear calipers to fit (but i need new slider boots for those first, do toyota sell them on their own?) then bleed the clutch and brakes, and if my doors come back from the painters fit those and swap everything over. Then start the stereo install, finish the custom centre console for the gauges, and loads of other stuff i cant remember

[toxo]

Yeah slider boots are available, I've just done a load on mine! And a mates IS200, they are the same part

[jasongtr]

cool ill pop into aylesbury tomorrow and get some

[toxo]

cool ill pop into aylesbury tomorrow and get some

When you do tell Si it's the same boots I just ordered for my brakes and that'll save farting around with the EPC.

Obviously you'll have to say John not toxo

[jasongtr]

i phoned up today but they dont have them in stock and they are £30 for all four!

[toxo]

WTF, they're £2.51 each, retail ex vat.

Part number 47775-50010

[jasongtr]

the chump in aylesbury (not the guy you know) told me there were two sizes one was about £8 each and the other about £4 each, so about £24 plus vat for all four

[toxo]

He's obviously talking about something else as they only come in one size, which is the partnumber I listed above.

Email [email protected] and tell him what you want.

[jasongtr]

thats what i thought, cheers for your help