I have a MBC sitting here. Is it possible to fit it without any additional Vaccum pipe?
Would appreciate any quick replies as would like to get it done this afternoon as work is slow.
Quick MBC Question
Moderators: IMOC Moderators, IMOC Committee Members
Re: Quick MBC Question
I did mine ages ago but I think you will need new pipe.
The existing one that goes from the compressor to the wastegate is too short to splice (and use) the MBC.
The existing one that goes from the compressor to the wastegate is too short to splice (and use) the MBC.
Re: Quick MBC Question
DeusMR2 wrote:I did mine ages ago but I think you will need new pipe.
The existing one that goes from the compressor to the wastegate is too short to splice (and use) the MBC.
Done it. The existing pipe was just fine.
-
- IMOC Moderator
- Posts: 10902
- Joined: Sat Dec 10, 2005 1:32 pm
- Location: Bonnie Dundee
- Contact:
Re: Quick MBC Question
Get the vsv disabled as well. You'll notice a massive difference in 1st and 2nd!
Re: Quick MBC Question
sheppy wrote:Get the vsv disabled as well. You'll notice a massive difference in 1st and 2nd!
Done my friend. I don't see why some folk cut and plug the vaccum line. Just unplug it under the inlet manifold.
Decat and IC on the list next. Ain't looking forward to those jobs.
Re: Quick MBC Question
sheppy wrote:Get the vsv disabled as well. You'll notice a massive difference in 1st and 2nd!
Could you tell me what the vsv stands for m8